KIT-HYS60MB 30m 345mm (1.2 in) (13.6 in) 645mm (25.4 in) 14b 14a 14 9a 9b Accessories: 1. Handle 9a. Red Positive Battery Clip 2. Latches 9b. Black Negative Battery Clip 3. Aluminum frame 10. Anderson Plug 4. Aluminum support legs 11. Fuse 5. Solar charge controller 12. Handy carry bag 6. Junction box 13. Corner protector 7. Label 14. MC4 cables 8. Cable 14a. Red Positive MC4 Cable 9. Battery Clips 14b.
KIT-HYS60MB Introduction This portable solar panel comes with a pre-installed charge controller. This charge controller protects battery against unsafe electrical conditions and must be used to charge 12V batteries. To charge solar generators with a built-in charge controller, simply use the MC4 cables provided and plug them into the cables that came with your power station to charge. A 12V battery and solar generator can be charged at the same time.
KIT-HYS60MB Method 2: Use your solar generator To test if the solar panel is working with a solar generator with a built-in charge controller, connect the MC4 adapters that came with your solar generator and plug it in to the MC4 cables of the solar panel directly (14a and 14b, Table 1). Turn your solar generator on and it should start charging from the solar panel.
KIT-HYS60MB How to change the battery type? Tip:MT-50 remote meter needs to be purchased separately To change the battery type to something other than sealed(default), a MT-50 remote meter is needed. For a more detailed guide, follow the user manual for the MT-50 remote meter. Below will be a simple explanation on how to change the battery type. Parts: 1. Communication Indicator 2. Alarm Sound port 3. Warning Indicator 4. 4 X Mounting Holes 5. Display Screen 6. Navigation Buttons 7.
KIT-HYS60MB What are you going to use it for 1. Charge solar generators 1.1. Charge 12V Solar Generator with built-in Charge Controller Step 1: understand your solar generator and prepare the MC4 adapter for your solar generator Step 2: Disconnect MC4 Connectors and let it to be a solar panel with MC4 connectors Step 3: Use your MC4 Adapter to charge your solar generator 2.
KIT-HYS60MB Specifications 60w solar panel Specification Type Module Size N.W Max- Max- Open- Short- Circuit circuit Voltage Current V A Max-power Power Power Current Voltage Module mm Kg 645*345*30 9.6 (25.4*13.6*1.2in) (21.2 lb) 2*30w W V 2*30 17.8 A 2*1.69 22.3 2*1.82 Charge Controller This solar panel module comes with a 10A solar charge controller which will look like the one shown below.
KIT-HYS60MB Wiring Figure 2 Connection diagram Installation Procedure: 3 PV array 2 load Connect the system in the order of 1 battery with Figure 2”Connection diagram” and disconnect the system in the reverse order 3 2 1 .
KIT-HYS60MB Troubleshooting Faults Charging LED indicator off during daytime when sunshine falls on PV modules properly Wire connection is correct, the controller is not working. Battery indicator green slowly flashing Possible reasons Troubleshooting PV array disconnection Confirm that PV and battery wire connections are correct and tight Battery voltage is lower than 8V Please check the voltage of battery. At least 8V voltage to activate the controller.
KIT-HYS60MB FREQUENTLY ASKED QUESTIONS(FAQ) ACOPOWER is always open to customers with technical support, if you have any issues, please feel free to contact ACOPOWER by email at support@acopower.com Here we collected some frequently asked questions for reference: Q. What type of batteries can be used with the kit? A: 1. sealed lead-acid battery (Sealed) 2. colloidal lead-acid battery (Gel) 3.
KIT-HYS60MB Q: Can I use my own controller, or can I use MPPT charge controller? A: Yes, if you would like to do so, please remove the charge controller and use the solar panel with MC4 connectors to connect your own controller. Q: I connect the kit with my battery with red clamp to Positive and black clamp to Negative, why the lights of charge controller are not on? A: we suggest charging your car battery for the kit’s test. And then test your solar panel’s open circuit voltage and battery’s voltage.
KIT-HYS60MB Warranty Limited Product Warranty-One Years Repair,Replacement and refund Remedy, but fuse excluded The solar panel itself comes with an 18-months workmanship warranty and a 25-year 85% output warranty. Within 30 days of purchase: Items can be returned for a full refund or replacement, we will cover return shipping due to quality issues, buyer pays return shipping and replacement shipping due to non-quality issues.
