Full Product Manual

www.ACOPower.com
KIT-HYS60MB
4120 Valley Blvd Walnut, CA 91789, USA
[phone]
Wiring
Figure 2 Connection diagram
Connect the system in the order of battery load PV array in accordance
with Figure 2”Connection diagram” and disconnect the system in the reverse order .
1
1
2
2
3
3
Installation Procedure:
Indicators and buttons
(1)Indicator
Indicator
Color
Status
Information
Green On Solid
PV connection normal ,but
low voltage(low irradiance)
from PV, no charging
Green OFF
No PV voltage(night time)
or PV connection problem
Green
Slowly Flashing(1Hz)
In charging
Green
Fast Flashing(4Hz)
PV Over voltage
Green
On Solid
Normal
Green
Slowly Flashing(1Hz)
Full
Green
Fast Flashing(4Hz)
Over voltage
Orange
On Solid
Under voltage
Red
On Solid
Over discharged
Red
Slowly Flashing(1Hz)
Battery Overheating
Red
On Solid
Load ON
Red
OFF
Load OFF
Red
Slowly Flashing(1Hz)
Load overload
Red
Fast Flashing(4Hz)
Load short circuit
Charge, Load and Battery(orange)indicator flashing
Controller Overheating
Charge, Load and Battery(red)indicator flashing
System voltage error
(2)Button
①The load is turned ON/OFF via the button when the working mode is Manual Control.
②
Clear the faults for the load overload and short circuit .
Power Your Green Life!