Use and Care Manual

7. FAQ
• The food inside is frozen: The setting temperature is too low.
• Hear water from the inside of fridge: It is normal, due to the flow of refrigerant.
• Display F1 code: Low power protection: setting the protection from H to M or L
• Display F2 code: Fan overload protection: turn off unit and restart the unit after
30 minutes
• Display F3 code: The compressor protection is activated: please turn off the unit
and restart the unit after 30 minutes.
o Check that the battery bank switch is turn on
o Check the power supply connection
o Check the plug and the socket connection.
o Check for burnt fuse.
o Ensure unit has been properly powered to ‘ON’ mode.
o Compressor may be in delay start protection.
• The appliance is not working:
13
• Display F5 code: Compressor controller module protection is activated: please
turn off the unit, keep it in a well-ventilated location and restart the unit after 30
minutes.
• Display F7/F8 code: Temperature sensor error: please move the unit in regular
temperature area for a while, then restart the unit.
If you still have the error, please contact us for support.
• High temperature - it causes the cooling effect to be inconspicuous:
If the compressor temperature of the refrigerator exceeds 75 ° C / 167 ° F, it will
turn on over temperature protection and stop working.
The cooling temperature cannot be lower than the ambient temperature of 50 ° C /
122 ° F. Example: Ambient temperature 50 ° C / 122 ° F. Then the maximum effect
inside the refrigerator will reach 0 °C / 32 °F.