User's Manual
Acorn Stairlifts User Manual
ENGLISH
11
STAIRLIFT OPERATION
1
2
3
4
5
6
7
8
9
The Acorn 180 Curved Stairlift is a modular system, designed for easy assembly
and maintenance utilising the rack and pinion method of travel along the rail,
which is still the most reliable system available. This method is used with
customer safety paramount throughout design and manufacture. You may
experience some small bumps or jolts during use of the stairlift; this is normal
for this type of technology
Lower the footrest.
Lower the seat and arms.
Hold down one of the swivel paddles
and swivel the seat until it locks into its
operating position as shown. (At the top
of the stairs only).
Sit in the seat and fasten the seatbelt.
7KHDUPVDUHƷWWHGZLWKVDIHW\LQWHUORFNV
and must be completely down in position
for the stairlift to work.
Press the direction controller in the
direction of travel.
After a short delay, the stairlift will begin
WRPRYHVORZO\DWƷUVWXQWLOLWUHDFKHV
full speed. Keep the controller pressed
down continually throughout the journey.
The stairlift will slow down around certain
bends for your comfort and safety.
The stairlift will automatically slow down
and stop when it reaches the end of its
travel.
To swivel the seat, hold down one of the
seat paddles and rotate the seat. Release
the paddle and keep rotating until it locks
into position, partly or fully around. (At the
top of the stairs only).
It is now safe to undo the seatbelt and
leave the stairlift.
You may at this point swivel the seat back
and fold the footrest, arms and seat up.
10
11
USING YOUR STAIRLIFT
1
2
2
3
4
6
6
7
2