BS1370 BLUETOOTH SPEAKER Instruction Manual
A. INTRODUCTION This Bluetooth wireless speaker system applies the latest Bluetooth 3.0 wireless technology platform that enables you to enjoy music, video everywhere you want. B. FEATURES 1. Bluetooth 3.0 Platform 2. A2D Profile 3. Operating distance up to 10 meters / 33 feet (open area) 4. IPX 4 Water-proof feature 5. 3.5mm line in jack 6. Handsfree telephone calling 7. Operation time up to 3-4 hours (medium volume) C. PACKAGING 1 X Bluetooth speaker 1 X 3.5 to 3.
D. COMPONENT IDENTIFICATION 1. SPEAKER 2. Talk /Reset 3. Power ON/OFF 4. Power LED Indicator 5. Charging LED. 6. USB charging jack 7. 3.5mm audio jack 8. NFC 9. Microphone E. PAIRING 1. Press the power button for 3 seconds to turn the speaker on, the speaker will enter pairing mode immediately. The Blue (or Green to be confirmed) LED light will start flashing quickly. The pairing time will last for 5 minutes.
2. Enable your Bluetooth device such as cell phones, tablets or other Bluetooth media, and make sure it is in searching mode. 3. Select “HeadRush 8016807” from the list of discovered Bluetooth devices on your cell phones, tablets or other Bluetooth media. Wait for the connection to be completed. 4. Enter “0000” if password is required. 5. Select HeadRush 8016807” from the list of discovered Bluetooth devices on your cell phones, tablets or other Bluetooth media. Wait for the connection to be completed. 6.
F.CHARGING 1. Make sure the speaker is fully charge before initial use. 2. Connect speaker with your PC by the supplied USB to Micro USB cable for charging. 3. Charging is workable to connect with PC by the supplied USB to Micro USB cable for charging. 4. The charging LED will illuminate in Red when charging . Charging is finished when LED turns OFF 5. Fully charge the unit by PC USB port will take 2.5 hours.
G. 1. 2. LINE-IN Connect the speaker with your audio device directly by the supplied 3.5mm cable The BlueTooth wireless music will be by pass after line-in connection is made H. TELEPHONE CALL 1. If there is an incoming call when streaming music on the speaker, the music will be muted and ring tone will be heard. 2. Take your call by pressing the talk button. Press once again when ending the call. Music will resume again automatically. 3.
J. TROUBLE SHOOTING NO SOUND - Ensure the speaker is charged and with enough power for operation - Ensure the speaker is ON. - Ensure BT device is ON. - The volume of speaker is too low, adjust the volume to an appropriate level. - Unable to connect with Bluetooth device, RESET the speaker by pressing and holding the Talk button for 12 seconds. This device complies with Industry Canada Licence-exempt RSS-standard(s).
