User's Manual

HEADPHONE

RECEIVER

Press the Power button on the right hand side Headphone ‘cup’for 3seconds to turn

the wireless function on - the Blue LED light will flash.

The headphones are now linked up (paired*) with the Dongle and the Blue LED light

will be on continuously.

OPERATIONS

To start up this system and enjoy the music, please take following steps:

1. Connect the power adapter between the transmitter and wall outlet., the LED on the transmitter will

light up in green.

2. Connect the transmitter with your audio source, turn the source ON, the LED will turn from Green to

Blue.

3. Turn on the headphone receiver by pressing ON/OFF switch, LED will then be Blue flashes.

4. If the LED on the headphone is OFF immediately, please put the headphone back to the transmitter for

recharging.

5. When the audio link is established, LEDs turns to Blue and music comes out.

6. If the LED on the headphone remains in Blue flashes, please check with troubles shooting processes.

7. When listening is ended, turn OFF the headphone.

①

②

③

④

1. Power LED Indicator

2. Power Key

3. Vol+, Pair, Vol-

4. 3.5mm Audio In Jack

PDF created with pdfFactory trial version www.pdffactory.com