Operation Manual

3. For use with amplifiers not having either a subwoofer Out jack
or Line level pre-amp jack
Using speaker cable from the speaker terminals on your amplifier, connect
to the Hi-level speaker input terminals on the AELITE Sub, and then a
further set of cables from the Hi-level output terminals to your main
stereo/satellite speakers. (The stereo speakers receive the original amplified
signal minus the frequencies used by the subwoofer). This provides greatest
power handling for the system with good overall performance.
Connections
ACO USTIC ENERGY
2. For use with amplifiers having line level pre-amp jacks:
The pre-amp outputs of your amplifier can be connected to the line-level
inputs on the AELITE Sub. The line level outputs on the AELITE Sub are then
connected back to the power amp (main) inputs on your amplifier. This
provides the greatest power handling for the stereo speakers.
ACO USTIC ENERGY