User manual

18
Clock and alarm
To activate or deactivate the alarm clock:
1. Press ALARM.
2. If alarm is off, press ALARM again to activate
it.
• If alarm is already on, press ALARM again to
deactivate it.
To turn off the alarm clock when it sounds:
• Press ALARM or ON/STANDBY to turn off the
alarm clock. It will sound again on the next
day if settings have not been changed.
OR
• Press SLEEP/SNOOZE to turn off the alarm
clock temporarily for extra sleep time. The
alarm will sound again after 10 minutes.
OR
• The alarm clock will turn off automatically
after 60 minutes without pressing any button.
Sleep mode
You can set the radio to play for a set length of
time before turning off automatically.
1. Press SLEEP/SNOOZE to turn on the Sleep
mode while listening to the radio.
• The default time is 15 minutes.
• If the radio is off, press SLEEP/SNOOZE to
turn on the Sleep mode with the last used
channel.
2. If necessary, press SLEEP/SNOOZE again to
add extra sleep time up to 90 minutes. Each
press of the button will add 15 minutes.
• The remaining time before turning off
automatically will show at bottom right of the
clock display, replacing the weather
information.
• Select OFF (press SLEEP/SNOOZE once more
after 90 min) if you decide not to use the
sleep mode. The radio will turn off.
• To cancel the Sleep mode sooner, press ON/
STANDBY.
Using the alarm clock
To set the wake time and sound:
1. Press and hold ALARM until the hour time of
the alarm clock is highlighted (reversed color)
on the display.
2. Press or to select the wake hour time.
3. Press to shift to minute time.
4. Press or to select the wake minute time.
5. Press to shift to AM/PM.
6. Press
or to select between AM and PM.
7. Press to shift to Select Sound and then
press SELECT.
8. Press or to highlight one of the sources
of wake sound:
• Buzzer
• AM Presets
• FM Presets
• Internet Presets
9. Press SELECT on the highlighted source of
wake sound and then press or to select
the desired sound or preset item.
10. Press SELECT to confirm the selected item as
the wake sound.
• When the radio loses electricity, the alarm
clock will be powered by the batteries
inserted at the base (refer to page 9). The
wake sound selected will be reverted to the
default buzzer.
• When the selected sound is no longer
available, the default buzzer will sound.
Read relevant sections (e.g. Internet
Radio) in this user manual to
understand how to preset stations.