Specifications

11
ARWR2 Receiver with Amplifier
The front of the ARWR2 Receiver with Amplifier is the same as ARWS3 Subwoofer
Receiver. The back is different.
17. SPEAKER OUT:
Connect to a speaker with an impedance from 4 to 8 ohms. Connecting to a
speaker with an impedance less than 4 ohms may cause damage to the power
amplifier.
18. DC 26V 2.5A:
Insert the DC 26V/2.5A AC-DC Adaptor plug.
19. LINK button:
Press this button to connect the ARWR2 Receiver with Amplifier to the Transmitter.
20. LINK (LED indicator):
When the power is plugged in but the receiver is not linked to a transmitter the LINK
text will glow red. When the receiver is linked to a transmitter the LINK text will glow
green. If the LINK text is blinking red-green this indicates the system is in the pro-
cess of linking. See complete description of linking process on page 15.
19
18
17
Bracket
ARWR2 RECEIVER WITH AMPLIFIER
13
Bracket
20