Owners Manuals Manuels des utilisateurs UNO Setup Guide Everything you need to get going with your new Xsight™ Uno remote control: >> Out of the Box >> Installing the EZ-RC™ Remote Control Setup Wizard >> Creating Activities >> Creating Favorites >> Troubleshooting
Out of the Box Quick Look: > Unpack > Install batteries > Tips for using the remote screen > Remote setup > On-remote setup of TVs, A/V components, and other devices 1 What you’ll be doing by the end of this section: Controlling your home theater devices Unpack The first step is to make sure you’ve got the following parts in your package: • • 2 The Xsight™ Uno remote CD-ROM • • 4 AAA batteries This setup guide • 1 USB adapter Install batteries The next step is to install the Xsight™ Uno’s batt
Out of the Box Tips for using the remote screen To select an item on the remote screen, all you have to do is highlight and select. To highlight an item: Use the up and down arrow keys beneath the screen. To select an item: Press the key. Many remote menus have more items than will fit on a single screen. If you don’t see the item you want on a menu screen, look for the arrow in the lower-right corner of the screen...that means there are more items in this menu.
3 Remote Setup Once you’ve installed the remote’s batteries, you’re ready to start setting it up. The Xsight™ Uno has screens that guide you through the initial setup process. Language English Set Language Use the arrow keys below the screen to highlight the language you want the remote’s menus to appear in (probably English). Press the key to select it. Español Deutsch Setup Guide Welcome to your Xsight! To scroll between pages, press the keys below the screen.
On-Remote Device Setup The Xsight™ Uno lets you set up your devices (up to 6) in seconds, right on the remote, with a built-in library of codes for the most popular models of the most common home theater devices: DVD players, plasma and LCD HDTVs, and much more. Note: If you quit setup before reaching the Add Device screen, you can access device setup through the Settings menu on the remote.
Don’t see your brand? Try the EZ-RC™ Remote Control Setup Wizard! On-remote device setup supports the most popular models of the most popular brands. The EZ-RC™ Remote Control Setup Wizard handles everything else! So, if you don’t see your brand listed in the on-remote device setup, you can set it up using your PC and the EZ-RC™ Remote Control Setup Wizard. See the sections that follow for information. To go back a screen: Add Device Select Brand Sony Choose your device’s brand.
Use the EZ-RC™ Remote Control Setup Wizard! The setup wizard lets you enter your device’s model number to find exactly the right code for your device. If you find a code that does most of what you want to do with a device, you can learn additional keys from your original remote through the remote’s Settings menu (see the remote’s user manual for instructions). Test Codes Code 2/6 Test the Power key and others.
Want to start over? You can reset the remote to its settings when you first unpacked it. This removes all information about your devices, activities, and other setup parameters. 1. Press the (Home/Back) key on the remote to go to the Home screen. 2. Use the down arrow key to access the second page of the Home screen. Highlight Settings and press to select it. 3. Use the arrow keys to go through the pages of the Settings menu until you see the Reset option. Select Reset.
Installing the EZ-RC™ Remote Control Setup Wizard 1 Make sure your PC satisfies system requirements Minimum hardware requirements • USB 2.0 port • CD-Rom drive • Internet connection Minimum software requirements • Windows XP, Windows Vista, or Windows 7 (does not support Windows 2000) • Internet Explorer 6.
2 Install the EZ-RC™ Remote Control Setup Wizard Insert the CD-ROM that came with your Xsight™ Uno into your PC. The EZ-RC™ installation program should start automatically after a minute or so. Follow the CD-ROM’s on-screen instructions to install the EZ-RC™ Remote Control Setup Wizard. What if my CD doesn’t start installation automatically? 1. Open the CD and double-click on the icon shown here. 2.
5 Connect your remote when prompted Use the USB cable that came with your remote to connect it to a USB port on your computer. Welcome Shannon! The EZ-RC wizard will now help you set up your new universal remote control in just few easy steps. To get started, please connect the remote control to your computer using the USB cable that was provided. When done click Connect below. + + - - How do I know if the remote’s connected? Installing Look for the green arrow icon in your PC’s status bar.
....................................................................................................................................................................................................................................... Perfect! You’ve successfully connected your Xsight Uno. Now you’re ready to set it up. Just choose one of the options below then click Start. Or, if you’d like an overview of everything you can do here, take a tour.
Activities Quick Look: > Set up the “Hello” activity (all on) > Set up the “Good Night” activity (all off) > Set up a “Watch Movie” activity > Set up a “Watch Satellite/Cable” activity What you’ll be doing by the end of this section: Controlling your entire home entertainment system with one touch. Set up your first activities Activities Activities give you one-touch control over your entire home theater...watch movies, your favorite TV shows, listen to music...
1 Add a “Hello” activity. In the main menu, click Activities and select Add an activity from the submenu. Main menu You currently have 0 Activities set up. You can select Add, Modify or Delete Activities below. Learn more Devices 1 2 3 Activities Add an Activity Favorites Modify an Activity Advanced Delete an Activity Manage my account | jane_doe@aac.com Main menu ..................................................................................................................................
Configure the “Hello” activity for your devices. Main menu Set up Hello Activity Sony TV Power: On Onkyo DVD Power: Once you’ve given the “Hello” activity the name you want (or left it as “Hello”), the next lets you set how each of your devices are powered on. Wizard 1 2 3 4 5 6screen Use the pull-down menu for each device to set that device’s power-on command. The options are: Here you can choose which device you want to Power On or On Off for this activity.
3 Test the “Hello” activity with your devices. Main menu Set up Hello Activity Once your remote is ready to test, the screen to the right appears. 1 2 3 4 5 6 Carefully disconnect the remote from your PC. The remote screens guide you through testing this activity. Disconnect the remote. Turn Off the Devices you intend to turn On with this Activity, or vice versa. Then follow the instructions on the remote control LCD screen to test the Activity.
Test Activity Throughout the Activity test, point the remote towards your devices. Test the entire activity The next screen lets you test the “Hello” activity with your entire system. IMPORTANT: Make sure all your devices are off before you start. Also make sure your remote is pointed directly at your home theater. Then press to begin the test. The screen says “Sending IR Functions” while the remote is sending the power commands.
4 Finish up the activity. If the activity worked with your remote, you’re just a step from the finish. If the activity did not work as you thought it should, you can use the EZ-RC™ Remote Control Setup Wizard to make adjustments or troubleshoot. Main menu Select Yes, it works! if the activity worked. Set up Hello Activity 1 2 3 4 5 6 Select Make adjustments if you know what needs to be changed (for example, if you noticed one of your devices didn’t turn on).
Setting up the “Good Night” activity (all off) 1 Add a “Good Night” activity. Main menu Choose Smart Wizard. Set up Activity Then click the Next button to continue. How would you like to set up your activity? 1 2 3 A screen appears showing you the steps you’ll go through to set up the activity using the Smart Wizard. Click the Next button to continue. Follow the smart wizard and answer a few simple questions (recommended) Use the advanced wizard to set up the activity.
2 Configure the “Good Night” activity for your devices. Set the power off commands 1 2 3 4 5 6given the “Good Night” activity the name you want (or left it as “Good Once you’ve Night”), the next Wizard screen lets you set how each of your devices are powered off. Here you can choose which device you want to Power On or Off for this activity. Use the pull-down menu for each device to set that device’s power-off command.
Test Activity DirecTV Harman/K OK Test Activity Throughout the Activity test, point the remote towards your devices. Begin Test Test Activity Reconnect USB to verify activity. Activities Test Again Read about the test The first screen gives you some information about the test. Use the arrow keys below the screen to go to the next page. IMPORTANT: Make sure all your devices are on before you start. Test individual power commands The second screen lets you test the power command you set for each device.
Try several times with the remote in different positions. If it still doesn’t work, go ahead and reconnect to PC to troubleshoot and correct the activity. Main menu Set up Good Night Activity Reconnect the remote to your PC 1 2 3 4 5 6 Once you’ve reconnected the remote, press Continue on the EZ-RC™ Remote Control Setup Wizard screen. Disconnect the remote. Turn Off the Devices you intend to turn On with this Activity, or vice versa.
Setting up a “Watch Movie” activity The next activities, “Watch Movie” and “Watch Satellite” (or “Watch Cable”), are different from the “Hello” and “Good Night” activities. For these activities, you will use the Advanced Wizard. The Advanced Wizard gives you more options to customize these activities to fit exactly the way your home theater is set up. But you should gather a little information about your devices before setting up the device in the EZ-RC™ Remote Control Setup Wizard.
3 Add a new activity in the EZ-RC™ Remote Control Setup Wizard. Choose Advanced Wizard Set up Activity 1 2 3 For the “Watch Movie” activity, choose the Advanced Wizard and click the Next button to continue. Follow the smart wizard and answer a few simple questions (recommended) Use the advanced wizard to set up the activity. Select the advanced wizard when you require more flexibility with creating your function list.
Main menu Setup Watch Movie 1 2 3 4 Here you can control each step by selecting the device and the keys to send when starting the activity. You can also build in a bit of a delay between steps. For example, your TV may not respond to a channel-change command until it’s been on for a few seconds already. Hide extended functions 1 In the screen that follows, enter the series of keypresses you use to watch a movie on your entertainment system. Use the chart for YOUR setup on page 23 to add the keypresses.
Don’t see the key command you want? Main menu Modify Watch Movie Onkyo DVD Menu navigation keys control: Onkyo DVD Volume keys control: Harman/Kardon Au... Channel keys control: DirecTV Satellit... TeleText keys (Color keys): Onkyo DVD Playback keys control: Onkyo DVD Number keys control: Same as channel keys Onkyo DVD Input key controls: Harman/Kardon Au... 26 DirecTV Satellit... ...................................................................................................................
Setting up a “Watch Satellite” or “Watch Cable” activity 1 Write down which devices you use to “Watch Satellite/Cable”. Look at the following example setup for “Watch Satellite”, then fill in the information for this activity in your home theater. Example setup Watch Satellite/Cable Control volume? Watch video? Change channels? A/V receiver TV Satellite rcvr YOUR setup What device do you use to...
3 Add a new activity in the EZ-RC™ Remote Control Setup Wizard. Choose Advanced Wizard Set up Activity 1 2 3 For the “Watch Satellite” or “Watch Cable” activity, choose the Advanced Wizard and click the Next button to continue. Follow the smart wizard and answer a few simple questions (recommended) Use the advanced wizard to set up the activity. Select the advanced wizard when you require more flexibility with creating your function list.
Main menu Setup Watch Satellit In the screen that follows, enter the series of keypresses you use to watch a movie on your entertainment system. Use the chart for YOUR setup on page 27 to add the keypresses. 1 2 3 4 Here you can control each step by selecting the device and the keys to send when starting the activity. You can also build in a bit of a delay between steps. For example, your TV may not respond to a channel-change command until it’s been on for a few seconds already.
To delete a command from the sequence: Click the X icon next to the icon in the sequence. Answer Yes to the dialog box that appears to delete the command from the sequence. To change the timing between commands (sometimes useful if a device needs to respond to one command before it can respond to another): click the clock icon in the second line of the command and use the arrows to adjust the number of seconds to wait before giving the next command.
Using your activities 1 Press the Watch Movie 2 3 When you start using your home theater—before you turn anything on—choose the Hello activity. Hello Assist Assist? Picture Back Sound PIP Power How do I know when an activity has finished? When you see the Assist and soft keys for one of your devices on the remote screen, the remote has finished sending the activity’s commands and is ready to do something else. Need help after the “Hello” activity has finished? Select Assist.
What if Assist doesn’t work? If the Assist screens are not helping you find the correct inputs on your devices, check the following: • Is the wrong device changing inputs? Make sure the input key you see on the Sound/Picture screen is the correct one for the device you’re trying to change.
Favorites Quick Look: > Create your Favorite Channels list What you’ll be doing by the end of this section: Using the Xsight™ Uno your way, all at the touch of a button. Creating your Favorite Channels list Favorites lets you set your Favorite Channels (up to 6) and preferred settings for channel surfing. Set up your favorites. Main menu Devices 2 3 Activities Modify favorite channels. Learn more Set up Favorites Favorites Advanced Manage my account | jane_doe@aac.
Main menu Set how many digits your channels have 1 2 3 Set up Favorites For example, if your channels go up to 999, then you should select 3 digits. If the channels go to up to 99, you should select 2 digits. Choose the option that works for your home theater, then click Next.
Main menu You can add it manually by choosing Other at the top of the list. Channel Line Up: Add your favorite channel by clicking on the arrow. Current Favorite: Channel Name: USA Other X Channel Number: 208 ESPN Replace Channel ESPN Cl ESPN 2 Remove Favorite Channel Main menu Set up Favorites Type in the channel number 1 2 3 Please choose from the channel list below to add to your favorites page.
3 Choose the devices controlled by each section of the remote. Main menu Set up Favorites 1 2 3 list of functions for: LCD screen will display a Onkyo DVD list of functions for: Onkyo DVD Menu navigation keys Menu navigation keys control: control: Onkyo Onkyo DVD DVD Volume keys control: Volume keys control: Harman/Kardon Au... Harman/Kardon Au... Channel keys control: DirecTV Satellit... Channel keys control: DirecTV Satellit...
Most common problems with your Xsight™ Uno can be resolved by trying one of the following solutions. If you have any further questions, please call our help line toll-free at 1-800-276-0509. Initial setup • The screens are in the wrong language. Change the setting by pressing the (Home/Back) key to go back one or more screens in the setup routine. • How can I reset my remote? You can reset the remote to its settings when you first unpacked it.
The EZ-RC™ Remote Control Setup Wizard • The EZ-RC™ program won’t install on my PC. Your PC must be running Windows XP, Windows Vista, or Windows 7 (Windows 2000 is not supported). You must use Internet Explorer 6.0 or later (Firefox or Safari not supported). Windows XP users must have Service Pack 3 and .Net 3.5 To find out which service pack version you have: 1. Right click on My Computer on your PC desktop. 2. Choose Properties from the drop-down menu. 3.
• How do I know when an activity has finished? When you see the Assist key and soft keys for one of your devices on the remote screen, the remote has finished sending the activity’s commands and is ready to do something else. • My “Hello” activity didn’t work. On the remote screen, select Assist. Then select Power. Select the key for each device to turn that device on. Use the arrow keys below the screen to access more devices.
Need help setting up this remote? Please call our help line toll-free at 1-800-276-0509. Use of the software provided with this product may require the most recent Windows® updates in order to function properly. Any such updates are third party software which shall be governed by such third party’s license agreement. Audiovox is not responsible for any third party’s software and shall have no liability for your use of third party software.