Operation Manual

If you need more room or pixels to edit the controller data, simply click on the bar at the top of the controller area and
drag it up or down to resize the controller area.
Precise Editing Of Controller Information
Sometimes you may want to edit a controller to a specific value, but it is too difficult to move your mouse to the exact
pixel on the screen. For all controllers, besides Velocity, you can right click to add, edit or delete controller
information.
For example, if you want an external synthesizer to switch to patch 67, choose the "Program Change" controller, move
to the start of the track, right click and select "Add Controller" from the menu. A dialog box will pop up and allow you
to type in 67. Click OK and you will now have a program change #67.
The options that will appear on the right click menu are:
• Add Controller
• Edit Controller
• Delete Controller
• Delete All Controllers
Setting Virtual Instrument Clip Loop Points
You can make a Virtual Instrument clip loop. In the Piano Roll Editor, you can adjust the start and end loop points. To
move a loop point, simply click on the word Start or End and drag it.
For example, we'd like to make a loop from measure 2 to measure 3. Here is what we started with:
In this example, we drag the End loop point to measure 3 and then drag the Start loop point to measure 2 like this: