Operation Manual

This audio will be sent to any effects loaded on the Send Track. Additionally, the track's audio will also be processed
with the volume and/or pan automation envelopes on the Send Track.
Adjust the Send Track's automation, just as you would adjust any track's automation envelopes.
Send Volume Type
This determines if the track's audio is sent to the Send Track before or after it's own track's volume
automation/adjustment is mixed in.
• Pre Volume Adjustment - The track's audio is sent to the Send Track before applying its own volume
adjustments. (PRE-Fader Send)
• Post Volume Adjustment - The track's audio is sent to the Send Track after applying its own volume
adjustments. (POST-Fader Send)
To change the Send Volume Type, right click on the Send knob on either the Mixer or the Send knob on the
automation pane.
To reiterate, the send volume type determines whether audio from the track is routed to the Send Track before or after
the track fader and volume automation. The audio signal flow for a track is as follows:
1. [Clips (with clip-level automation)]
|
|
V
2. [Track Effects]
|
|
V
3. [PRE-Fader Send] *
|
|
V
4. [Track volume & pan]
|
|
V
5. [POST-Fader Send] *
* Depending on the send volume type, the audio from a track will be sent at one of the starred * points in the audio
signal flow.