Users Manual

PRODUCT CONTROLS
POWER
(Flashes)
(Breaths On/Off)
(Stays On)
(2 Sec. then Off)
Charging
Power
1 CONNECT the charge
port (8) to an external
power source using the
included USB cable.
• CHARGING, RED
LED (3) breaths on
and off slowly.
• LOW
RED LED
repeatedly flashes.
20%
• FULLY charged, RED
LED will stay on.
1 Turn the unit ON, press
and hold the POWER
Button (2) for 2 seconds.
• Turn the unit OFF, press
and hold the POWER
Button (2) for 3 seconds.
(Hold 3 Sec.)
(Hold 2 Sec.)
30 feet max connection range after pairing.
Devices out of range may suffer disruption
or loss of signal.
Full Charge – Up to 5 hours while powered OFF.
– Up to 12 hours while powered ON.
AUDIO
3 Ft.
Bluetooth Pairing
1 Place your smart
device within 3 FEET
from the speaker.
Bluetooth
®
2 The speaker will
automatically enter into
Bluetooth
®
Mode and
LED (6) will begin to
blink when turned on.
3 Select “MONSTER
TRAX” from the
Bluetooth
®
menu on
your smart device.
IMPORTANT: 5
(Blinking)
MONSTER TRAX
1.
Power Button
2.
Power LED (Red)
3.
Decrease Volume Button
4.
Microphone
5. Increase Volume Button
6. Bluetooth
®
/ EZ-Sync
LED (Blue/Orange)
7. Bluetooth
®
/
EZ-Sync Button
8. Type-C USB Charge Port
Controls & LED Lights
Port
31 652 4
8
7