Trims - Information

Palisade -J-Trim
Edge and Corner Trims
Inside Corner Trims should be aached with adhesive to the substrate. Dispense a small bead of adhesive directly to
the substrate corner or on the trim itself. Also dispense a bead of sealant into each of the trim’s channels to prevent
water from reaching the substrate.
J-Trims are used to finish the terminal end of les when not adjoined to anything. To install, don’t dispence adhesive a
few inches from the le’s edge where you intend to use the J-Trim. This will allow the trim to slide into place. Dispense
a bead of sealant into the receiving channel of the trim and then press the trim into place.
Palisade Tile
Palisade Tile
Cross-Section
Cross-Section
Palisade Tile
Palisade Tile
Drywall
Drywall
Inside Corner Application
J-Trim Application
Drywall
Drywall
Palisade Tile
Palisade Tile
Palisade - Inside Corner Trim
0.2"
0.06"
0.2"
0.9"
0.9"
Due to manufacturing variations,
we cannot guarantee an exact
color match from lot to lot. Prior
to installing, please unpackage &
lay out all purchased product to
ensure color consistency. If you
encounter unreasonable color
variation, please give us a call at
1-800-434-3750 (7am-4:30pm
CST, M-F) so that we may assist
you with your project.
TM
Waterproof, Grout-Free Wall Tiles

Summary of content (2 pages)