Service manual

Troubleshooting

1. Unplug / plug oven in

2. If code continues to appear.

Replace Electronic Limiter

CODE G0

1. Inoperative Monitor Switch

2. Interlock Switch Assembly out of adjustment

3. Broken or loose wire connection

1. Interlock Switch Assembly out of adjustment

2. Inoperable Monitor Switch

3. Broken or loose wire connection

Change Option Code #10 to OFF

Option #12 This is activated at the factory.

It will appear every 7 days.

Note: Customer can change this option

as desired.

OPERATIONAL CODES

CALL SERVICE

OPEN

DOOR

PLACE FOOD

CLOSE DOOR

IN OVEN

PREHEAT

OVEN NOT AT

TEMPERATURE

FILTER

CLEAN

During oven operation the display may indicate one of the following:

1. When you press the pad/ knob to preheat the oven the display indicates.

2. During cooking, the oven the display indicates.

1. After food is placed in the oven the door is closed the display indicates.

1. At the end of a cook cycle and the food is removed and the door is closed the display indicates.

2. When a pad is pressed the display indicates.

1. Normal do not service the oven for this.