Datasheet

CE14
14mm carbon potentiometers with plastic housing and protection
type IP 5 (dust-proof).
Standard tapers available include linear, log and antilog. ACP can
also study special requests.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
confi guration can be available on request.
Thumbwheels and shafts can be provided either separately or
already inserted in the potentiometer.
ACP’s potentiometers can be adjusted from either side, both in the
horizontal and the vertical adjustment types. There is a guide on
the housing to simplify the manual adjusting operations.
Our potentiometers can be manufactured in a wide range of
possibilities regarding:
- Resistance value.
- Tolerance.
- Tapers / variation laws.
- Pitch.
- Positioning of the wiper (standard is at 50%).
- Housing and rotor color.
- Mechanical life.
- Pause effect (up to 38 detents available).
- Self-extinguishable plastic parts according to UL 94 V-0.
Applications
- Electronic appliances: white goods, brown goods, small house-
hold appliances
- Heating and air conditioning equipment and thermostats.
- Automotive: dimmers, climate controls, lighting regulation (posi-
tion adjustment and sensing).
- Measurement and test equipment.
14mm cermet potentiometers with plastic housing and protection
type IP 5 (dust-proof). Self-extinguishable according to UL 94 V-0.
Standard taper is linear. Log, Antilog and other tapers are available
on request. Laser trimming equipment in-house, allowing for very
low tolerances.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
confi guration can be available on request.
Thumbwheels and shafts can be provided either separately or
already inserted in the potentiometer.
ACP’s potentiometers can be adjusted from either side, both in the
horizontal and the vertical adjustment types. There is a guide on
the housing to simplify the manual adjusting operations.
Our potentiometers can be manufactured in a wide range of
possibilities regarding:
- Resistance value.
- Tolerance.
- Tapers / variation laws.
- Pitch.
- Positioning of the wiper (the standard is at 50%).
- Housing and rotor color.
- Mechanical life.
- Pause effect (up to 38 detents available).
Applications
- Electronic appliances: white goods, brown goods, small house
hold appliances, boilers, water heaters, etc.
- Heating and air conditioning equipment and thermostats.
- Automotive: dimmers, climate controls, position sensors.
- Industrial electronic: multimeters, oscilloscopes, test equipment,
time relay.
CA14
|
www.acptechnologies.com
|
31
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de