Datasheet

6mm carbon potentiometers with plastic housing and protection
type IP 5 (dust-proof).
CA6 potentiometers are available both in through-hole and in SMD
terminal confi guration. The substrate in our SMD potentiometers is
high temperature resistant, for refl ow soldering.
Tapers available include linear, log and antilog, even for SMD po-
tentiometers. ACP can also study special requests.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), which is recommended to hold
the potentiometer to the board prior to the soldering operation.
Thumbwheels and shafts can be provided either separately or
already inserted in the potentiometer. CA6VSMD potentiometers,
with or without thumbwheel, can be requested in Bulk or Tape &
Reel (T&R) packaging.
ACP’s potentiometers can be adjusted from either side, both in the
horizontal and the vertical adjustment types. There is a guide on
the housing to simplify the manual adjusting operations.
Our potentiometers can be manufactured in a wide range of pos-
sibilities regarding:
- Resistance value.
- Tolerance.
- Tapers / variation laws of the resistive element (linear, log,
antilog).
- Others on request.
- Pitch.
- Positioning of the wiper (the standard is at 50%).
- Housing and rotor color.
- Mechanical life.
- Self-extinguishable plastic parts according to UL 94 V-0.
Applications
- Small electronic appliances.
- Measurement and test equipment.
- Automotive: alarms, switches
- Telecommunication equipment (antenna amplifi ers and receivers,
videocomm., intercomm.)
- Alarm systems.
CA6
|
www.acptechnologies.com
|
15
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de