Datasheet

Complete drawings can be found on pages 76-77
Models
All models shown here have the standard rotor for the 6mm series, the cross (X). Models can be manufactured with any of the rotors listed
on the rotor menu. The color of the housing or rotor can also be modifi ed.
CA6 H2,5 CA6 HSMDCA6 V5 CA6 VS5 CA6 VSMDCA6 V 2,5
Rotors
The rotor by default is the cross (X). Accessories are designed for the X rotor.
0,65±0,05
1,6
+0,05
-0
1,85
+0,07
-0,03
0,65±0,05
MN X
1,5±0,05
Shafts
Shafts are offered in different colors. On request, they can also be provided in accordance with UL 94 V-0.
Potentiometers can be supplied with shafts already inserted in. ACP can also study special shafts.
6022 6023 6024 6025 6028 6031
13
13
15,2
17,5
18,3
14
Thumbwheels
Thumbwheels are offered in different colors. On request, they can also be provided in accordance with UL 94 V-0.
Potentiometers can be supplied with thumbwheels already inserted in. ACP can also study special thumbwheels.
6001 6030 6032
Terminals
In the CA6 family, ACP will always recommend terminals with “snap in” in order to better hold the component to the board prior to solder-
ing. (Not available for CA6VS5 model).
0,9
1,6
SNP
CA6
16
|
www.acptechnologies.com
|
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de