Datasheet

HOW TO ORDER
• EXAMPLE: CA9MH2,5-10KA2020 SNP PI WT9005-BA-V0
• EXAMPLE: CE9MH2,5-10KA2020 SNP PI WT9005-BA-V0
• CA9 • CE9
1 - Series
P (standard) PA R Y D M MA MT J
2 - Rotors
Through-hole SMD models
Bulk (blank)…
(1)
On request
T&R (Tape and reel) (N.A.)
(2)
On request
4 - Packaging
(1) If blank, bulk packaging is implied.
(2) N.A. - Not Available: Tape and Reel packaging is only available for SMD terminals.
100 Ω ≤ Rn ≤ 1MΩ: ±20% 2020
1 MΩ ≤ Rn ≤ 5MΩ: ±30% 3030
For out of range values: Rn > 5MΩ, tol : +50% - 30% 5030
Special tolerances available: <5% ... 10%, etc.
7 - Tolerance
Standard (1000cycles) (leave blank)
Long life: LV + the number of cycles. ex: LV10 for 10000 cycles
(1)
LVXX: ex: LV10
8 - Operating life (cycles)
(1) Others on request.
At beginning of track, CCW: Off - On PCI
At end of track, CW: On - Off PCF
9 - Cut track
One detent at the beginning: CCW DTI
One detent at the end: CW DTF
X number of detents. Ex., 10 XDT: 10DT
10 - Detents (DT)
Detents readily available: 3, 4, 6, 7, 9, 10, up to 20 –evenly distributed along 240º±5º. Others on request.
SNAP IN P SNP
SNAP IN J SNJ
11 - Crimped terminals (SNAP IN)
Taper: Lin (A) Log (B), Antilog (C)
100 Ω / 100 1KΩ / 1K
Value Rn … / … … / …
5 MΩ / 5M 2,2 MΩ / 2M2
5 - Resistance value
Other resistive values available on request.
Lin - Linear A
Log - Logarithmic B (on request for CE)
Antilog - Antilogarithmic C (on request for CE)
- Special tapers have codes assigned: CODE YXXXXX
6 - Resistance law / taper
Please, indicate terminal position when ordering a special taper.
Series Rotor Model Packg Ohm value Taper Tol Life
1 2 3 4 5 6 7 8
CA9/CE9 M H2,5 -10K A 2020
Standard features
Track Detents Snap in Housing Rotor Wiper Lin
9 10 11 12 13 14 15
SNP PI
Extra features
Assembly Ref # Color Flam.
16 17
WT 9005 -BA -V0
Assembled accessory
Dimensions: 9mm
Protection: • CA9: IP 5 (dust-proof)
• CE9:
IP-5 (dust-proof) Self-extinguishable, to meet UL 94 V-0
Substrate: • CA9: Carbon technology
• CE9: Cermet
Color:
• CA9: Blue housing with white rotor
• CE9: Brown housing with white rotor
Packaging: Bulk
Wiper position: at 50% ±15º
Terminals: Straight, without SNAP IN
Marking: Resistive value marked on housing. Others on request
Standard confi guration
A drawing is requested to order a customized product. The code assigned will
include all special specifi cations.
Series, rotor, model and total resistive value are given before the special code:
CA9PH2,5 10K CODE C00111.
Customized products
• CA9: standard is blue
• CE9: standard is brown
With other colors -see color chart below-, for example, red CJ-color, ex: CJ-RO
12 - Housing color
28
|
www.acptechnologies.com
|
H2,5 H3,8 H5 HS3,8 V7,5
V10 VR10 MAV10 MTV10
HSMD and VSMD models can be available on request.
3 - Model and pitch
CA9 CE9
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de