Operation Manual

ManualsBrandsACP ManualsMicrowavesMOC5241

OnCue Commercial

Microwave Oven

Keep these instructions for future reference.

If the oven changes ownership, this manual must

accompany oven.

Owner’s Manual

Contents

Model Identication ........................... 2

Precautions to avoid Possible

exPosure to excessive

microwave energy ................... 3

imPortant safety instructions ... 3

Grounding / Earthing Instructions ..... 5

Installation ......................................... 5

Display and Features ........................ 6

Using the Oven Control .................... 8

Programming the Oven Control ....... 9

User Options .................................. 10

Care and Cleaning ...........................11

Before Calling for Service ............... 12

Summary of content (12 pages)

PAGE 1
Owner’s Manual Contents Model Identification............................ 2 Precautions to avoid possible OnCue Commercial Microwave Oven Keep these instructions for future reference. If the oven changes ownership, this manual must accompany oven. exposure to excessive microwave energy.................... 3 Important safety instructions.... 3 Grounding / Earthing Instructions...... 5 Installation.......................................... 5 Display and Features.........................
PAGE 2
Model Identification When contacting ACP, provide product information. Product information is located on oven serial plate. Record the following information: Any questions or to locate an authorized service agent contact ACP, Inc. ComServ Customer Service at: Phone 866.426.2621 / 319.368.8195 or email: commercialservice@acpsolutions.com. Warranty service must be performed by an authorized servicer. ACP also recommends contacting an authorized servicer if service is required after warranty expires.
PAGE 3
IMPORTANT SAFETY INSTRUCTIONS Recognize this symbol as a SAFETY message ! WARNING When using electrical equipment, basic safety precautions should be followed to reduce the risk of burns, electrical shock, fire, or injury to persons including the following. 1. READ all instructions before using equipment. 9. DO NOT heat baby bottles in oven. 2. READ AND FOLLOW the specific “PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY” on this page. 10.
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS WARNING WARNING To avoid risk of fire in the oven cavity: Liquids such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling due to surface tension of the liquid. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. THIS COULD RESULT IN VERY HOT LIQUIDS SUDDENLY BOILING OVER WHEN A SPOON OR OTHER UTENSIL IS INSERTED INTO THE LIQUID.
PAGE 5
Installation Unpacking Oven • • • • Inspect oven for damage such as dents in door or inside oven cavity. Report any dents or breakage to source of purchase immediately. Do not attempt to use oven if damaged. Remove all materials from oven interior. If oven has been stored in extremely cold area, wait a few hours before connecting power. Radio Interference Microwave operation may cause interference to radio, television, or a similar oven.
PAGE 6
Display and Features Time Entry Start Stop Power Level Start Pad The start pad is used to begin a manual time entry cooking cycle. It is also used to save any changes to programming sequences or user options. STOP Pad The STOP pad stops a cooking sequence in progress, and also ends a programming or user option cycle. When the STOP pad is used to end a programming or option change, the changes are discarded. The STOP pad can also be used to open the door after it has been closed.
PAGE 7
Display and Features Appears after closing the door. Oven is ready to accept entries Example of display when cooking at variable power. Example of display when cooking at full power. Display when oven sitting idle. Cooking Display DISPLAYS 00:00 DESCRIPTION 50 50% MW POWER displays the current microwave power level. 100% is the highest setting, and 0% is the lowest. (example of 50 microwave power Displays cooking time. If stage cooking is programmed, total cooking time displays.
PAGE 8
Using the Oven Control Interrupting Operation Press STOP pad to interrupt or stop operation. Manual Operation To cook food using a specific entered time and power level. 1. Place food in oven. Close door. 2. Press TIME ENTRY pad and enter cooking time. 3. Press POWER LEVEL pad to program level of microwave power if less than 100% is desired. • For a lower microwave power, press pads 1 (for 10%), through 9 (for 90%), or 0 for no microwave energy.
PAGE 9
Programming the Oven Control Programming Items 1. Press and hold pad 1 for approximately 5 seconds. 2. Press pad to be reprogrammed. 3. Enter cooking time by using the number pads. 4. Press POWER LEVEL pad to program level of microwave power if desired. • For a lower microwave power, press pads 1 (for 10%), through 9 (for 90%), or 0 for no microwave energy. NOTE: Press POWER LEVEL microwave power. pad twice to return to 100% 5. Press TIME ENTRY pad to add up to four additional cooking stages.
PAGE 10
User Options Didn’t like an option? Factory settings are marked in bold. To change the oven back to the factory setting, simply select the option that is marked in bold. Changing user options Changing user options Options such as single or double pad programming and beep volume can be changed to suit individual preferences. To change options: 1. Press and hold pad 2 for approximately 5 seconds. 2. Option appears in display. • Oven is now in options mode. 3.
PAGE 11
Care and Cleaning WARNING To avoid electrical shock which can cause severe personal injury or death, unplug power cord or open circuit breaker to oven before cleaning. Care and Cleaning Clean interior and exterior of microwave oven with mild detergent and damp soft sponge or cloth. Wring cloth or sponge to remove excess water before wiping equipment. Splatter Shield (Clean Monthly) 1. Unplug the oven. 2. Place fingers behind the shield, pull forward and then down. Do not bend antenna. 3.
PAGE 12
Before Calling for Service ! WARNING To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time. Only an authorized servicer should remove outer case. Symptom Possible Cause Confirm oven is plugged into dedicated circuit. Oven does not operate. Confirm oven is on grounded and polarized circuit. (Contact electrician to confirm) Check fuse or circuit breaker. Oven operates intermittently. Check air louvers and discharge areas for obstructions.