Operation Manual

7
Display and Features
The START pad is used to begin
manual time entry for a cooking
cycle.
The STOP pad stops a
cooking sequence in progress,
clears any remaining time,
and also ends a programming
option cycle.
Quantity Pad
A/B Pad
Stage Cooking
X2
A/B
1
2
3
4
The power level keypad allows the user to change the microwave
power level for different stages of a cook cycle. For instructions on
how to program the power level, see page 10 of the Programming
Oven Controls section of this manual.
A user can program up to four different stages combining both
power levels and time changes per keypad. Each combination is
known as a stage. See page 10 of the Programming Oven Controls
section of this manual for more information about stage cooking.
Programs or settings can be changed and saved based on a user’s
preference. For instructions on saving changes, see pages 9-11 of
the Programming Oven Controls section of this manual.
Power Level Pad
Program Save Pad
0
Hidden Key Pad
The hidden key pad can be
used for adjusting oven controls
based on user preferences. It is
located to the right of the STOP
pad. For instructions on how
to use this, see page 11 of the
Programming Oven Controls
section of this manual.
Control Knob
The control knob, located to the
right of the number pads, can
be used for several different
purposes. If enabled, the user
may turn the knob to either add
or subtract time from the total
cooking time. Or, the user may
push on the knob to start a
selected cooking cycle, if enabled.
To learn how to enable this
feature, see pages 11 and 12 of
the Programming Oven Controls
section of this manual.
STOP Pad
START Pad
Manual Time Entry Pad
Time entry pad is used to enter cooking time for either
manual entry or programming. Cooking time ranges from
one second (00:01) to 60 minutes. If more than 60 minutes
of total cooking time is required, open door and inspect food
before beginning a new cooking cycle. Using manual time
entry does not affect the programmed settings.
The quantity pad automatically adjusts a preset cooking
time for two servings of a food item. When pressed before
a preprogrammed cooking cycle, the oven automatically
adjusts the cook time. To clear, open the door or press the
STOP pad. For instructions on how to use this feature, see
the Preprogrammed Pads section on page 9 of this manual.
The A/B pad toggles menu selection between two sets of
preprogrammed menu settings. Selecting Menu A allows
preset programs 0 through 9 to operate using keypads 0
through 9. Selecting Menu B allows preset programs 10
through 19 to operate using keypads 0-9.
Part No. 20152601
Printed in U.S.A. 8/15
Original Instructions
2015 ACP, Inc.
Cedar Rapids, Iowa 52404
A/B