Full Product Manual

TROUBLESHOOTING
Problem Possible Cause Corrective Action
Pump does
not start or
run
Pump
operates but
pumps little or
no water
1. Blown fuse
2. Tripped breaker
3. Plug disconnected
4. Corroded plug
5. Thermal overload
6. Motor failed
7. Float switch obstructed
8. Float switch failed
1.Replace fuse
2.Reset breaker
3.Secure plug
4.Clean plug prongs
5.Unplug for 30 minutes, then plug in
6.Call 833-290-1189
7.Make sure the float switch has room to
move and is not getting caught on
anything. Make sure your pit is at least 14
in. wide.
8.Purchase a replacement float switch at
the store
1. Screen blocked
2. Impeller loose on shaft
3. Impeller broken
1. Clean screen
2. Reassemble impeller
3. Call 833-290-1189
WARNING:
disassembling may cause an oil leak or dangerous electrical wiring issues.
Do not disassemble the motor housing. This motor has NO repairable internal parts, and