Acquirer 9815 3rd Street Road, Louisville, number's KY 40272, United States .
Voltage 115V/60HZz Horse Power 1/3HP Amps 3.9A Max. Head (ft.) 16.4 . Max. Flow (GPH) 3100@5ft Discharge Size (in.) Power cord length (ft.) 8.5ft. Model GPH of water @ Total Ft. Head Max. 5ft. 104th 15 t. Head PESTLE 3100 2430 1250 16.4ft Mod, ES050 Voltage 115V/60Hz Horse Power 1/2HP Amps 4.8A Max. Head (ft.) 23 1t. Max. Flow (GPH) 3370@5ft Discharge Size (in.) Power cord length (ft.) 8.51t. GPH of water @ Total Ft. Head Max Model . Sft. 101st. 151st 20#.
A warning « This pump motor Is not submersible. Do not submerge the motor or allow motor to bs exposed to ‘water. Personal injury and/or death from electrical shock could result. « Do not use this ult to pump chemicals, flammable liquids, sewage or corrosive liquids. You could Injure yourself and the pump will fall. Pumping theses types of liquids colds the warranty. « Water and electricity can be dangerous if certain precautions are not adhered to.
1. a. Insert the float rod through the hols in the switch. b. Carefully slide the rubber grommet onto the float rod. NOTE: Use liquid soap to halo slide the grommet on the float rod. . Slide glued onto the float rod and attach It to the column. d. Thread the float ball anti the float rod. You may need a set of pullers to prevent the rod from turning. 6. Moss the grommet up or down on the float rad to adjust the *tur on” position of the pump. » . Set your new pump In the bottom of the sump basin.
Problem Possible Cause Corrective Acton . Pump s not plugged In, switch or . Plug pump In or turn on switch The pump broker is off Breaker does not 2. Check for blown fuses or tripped 2. Replace fuse, reset breaker, reset Starstruck | circuit breakers or tripped GUCCI Clog outlet outlets 3. Replaces fuse, rests br reset 3. Switch is defective Clog outlet 4. Motor thermal protector tripped -4. Allow pump to cool. Pump will reset 5. Float ball is stuck or obstructed 5.
~ @ . Establezca su nueva bomba en el fondo del deposité de . Aseglares de qus ol flotador de bola se mover hacia arriba . a. Inserte la varilla dsl flotador a través del agujere en el Interruptor. b. Con cuidado, deslice |a arandela ds gamo sn la varilla dsl flotador. NOTA: El uso de jaén Liquido para ayudar a deslizar |a arandela en |a varilla del flotador. <. Mueva la fuga en la varilla del flotador y adintelado a la columna. d. Enrosque el flotada en la varilla del flotador.
