User guide

31 Y1-03-0202 Rev. E

13.6. Setting a New IP Address and Subnet Mask Example

Send Set IP Address &

Subnet Mask request

to RLB-35MC

Start

Command echoed

back?

Setting IP Address &

Subnet Mask Failed

Close socket

connection

End

Yes

Open socket

Connection on Port

7200

Set IP Address & Subnet Mask.

AC,53,CA,35,49,50,C0,A8,02,4B,FF,FF,FF,00,00,00

Set IP Address & Subnet Mask request is on port 7200

Setting IP Address &

Subnet Mask was

Successful

The above example is for an IP Address of 192.168.2.75

and a Subnet Mask of 255.255.255.0.

Note that this is the ‘Configure Capsule IP Address and Subnet Mask’ option

in our demo software. To make the new settings take effect, cycle power to

the RLB-35MC capsule.