Instruction Manual

Artex Products / ACR Electronics, Inc. 570-0023 Rev. G
Page 8 of 33
1. INTRODUCTION
This manual contains detailed information to install the self-powered remote switch 453-0023,
module interface 453-1101, and the buzzer 452-6505. In addition, these instructions highlight
the methodology to replace the cell in the remote switch. This manual is not intended to be an
installation for the ELT system.
Use this manual in conjunction with any of Artex ME406 series ELT manuals.
2. PARTS LIST
The following parts should be included with the 455-0023 and 455-7420 Pack Lists. Please
contact ACR Electronics, Inc., if shortages are found.
QUANTITY
PART NUMBER
DESCRIPTION
455-0023
Pack List, Self-Powered Remote Switch
4 ea.
209-0002
Screw, 4-40 X 1/2, SOC, SS, BLK
4 ea.
241-0400
HEX Nut, 4-40 Reduced Dim.
1 ea.
453-0023
Remote Switch, Self-Powered Assembly
1 ea.
570-0023
Manual, Remote Switch 453-0023, Module Interface
453-1101 and Buzzer 452-6505 Installation
1 ea.
591-0003
Label, 453-0023 Remote Switch Horizontal
1 ea.
591-0036
Label, Cell Replacement Warning
1 ea.
591-3029
Label, 453-0023 Remote Switch
QUANTITY
PART NUMBER
DESCRIPTION
455-7420
Pack List, ME406 Install Kit
4 ea.
201-0810
Screw, PHP 8-32 x 5/8 SS
4 ea.
241-0832
Nut, HEX 8-32 x 1/4 SS
4 ea.
246-0008
Washer, Flat, SS .036”-.045"
THK
2 ea.
850-0814
Sealant Strip, D-sub Connector