Technical data

Y1-03-0148 Rev. F
6
FIGURE 1 FIGURE 2
FIGURE 3
Mounting Case (Product No's 2774 & 2776 only)
Construction White High Impact and UV resistant plastic
Size 6.5" x 17.1" (16.51 cm x 43.4 cm)
Release System Hydrostatic with manual override
Replacement Parts
GPS Plug RapidFix Cat 1 9388.1
GPS Plug RapdiFix Cat 2 9388
Hydrostatic Release Kits 9490
Optional Mounting Brackets are available for Product No's 2775 and 2777.
Construction White High Impact and UV resistant plastic
Size 6.0" x 7.7" (15.2 cm x 19.5 cm)
3.2 Visual Inspection
3.2.1 Visually inspect the area surrounding the mounting bracket installation site for hidden hazards, obstacles,
etc., that may have been overlooked during selection. If there is any doubt as to the ready accessibility to
the beacon at all times or if any condition may appear to be questionable, make complete and thorough
investigation before making final approval of the installation.
3.3 Hydrostatic Release Dating Instruction (Product No. 2774 & 2776) Cat 1.
3.3.1 The label on the hydrostatic release mechanism inside of the bracket and the replacement date label on
the outside of the bracket MUST be marked with the date of expiration at time of installation according to
coastal marine authority regulations.