Product Info

Y1-03-0174 Rev. A Draft
7
2.4.2 Deactivation
To deactivate your PLB depress the “OFF” button for 1 second
SECTION 3 - REPORTING FALSE ALARMS
3.1 Should there be an inadvertent activation or false alarm, it must be reported to the nearest search and
rescue authorities. The information that should be reported includes the PLB Unique Identifier
Number (UIN), Date, Time, duration and cause of activation, as well as location of beacon at the time
of activation.
3.2 To report false alarms in the United States contact any of the following:
Atlantic Ocean / Gulf of Mexico
USCG Atlantic Area Command Center
Tel: [phone]
Pacific Ocean Area \ USCG Atlantic Area Command Center
Tel: [phone]
USCG HQ Command Center (From any location)
Tel: [phone]
USAF Langley, Virginia (From any location)
Tel: (XXX) XXX-XXXX
NOAA
Tel: (XXX) XXX-XXXX
SECTION 4 - CARE AND MAINTENANCE
4.1.1 Carefully inspect the PLB case for any visible cracks. Cracks may admit moisture, which could
cause a malfunction. Any cracking observed should be immediately referred to ACR for evaluation,
(1-800-432-0227)
4.1.2 Batteries may only be replaced at an authorized battery replacement center for the warranty to remain
in effect.
4.1.3 The batteries (P/N 1099) must be replaced by the date indicated on the beacon. At each inspection,
check the time remaining until replacement is required. Batteries should be replaced if the beacon
has been activated for any use other than the self test.
4.1.4 Avoid cleaning your PLB with household cleaners and hydrocarbon materials such as gasoline,
benzene, bleach, sanitizers, soaps, etc., simply wipe your PLB down with a damp cloth until clean.