Product Manual

12 Y1-03-0171 Rev. A
1 Meter
Minimum
2. Loop the lanyard over the canopy support and back through the holes located directly
under the switch ring. Secure the lanyard with a knot to secure the SART in place.
3. The SART should be as high as possible and at least 1m above sea level. Ensure SART
is not obscured by metal objects or inflatable Radar reflectors.
Vessel Mounting
To deploy SART on board a distressed vessel, rather than a life raft, hang SART near vertical as
high as possible, with a clear view of the horizon. The SART must not be obscured by metal
bulkheads etc.
Figure 6