Specifications

30
5.3 PLOT 3 Screen:
The PLOT 3 graphical display plots the positions of
other AIS targets relative to your own position
(center).
A vessel with neither a reported heading nor COG will be oriented toward the top of display area. The PLOT 3
screen is oriented as North Up only. You can change the zoom level using the UP or Down arrow keys. To zoom
out use the UP arrow key. To zoom in, press the down arrow key.
To change the target vessel # use the procedure below:
1. Press the EDIT key. This will show several softkeys at the
bottom of the screen.
2. Move the highlight using the left (or right) arrow key to
GOTO and press the ENT key.
3. Specify the index number of the AIS target as shown next
to the AIS icon targets in the PLOT 3 or listed in the AIS 2
screen. The data field will show the AIS parameters for
that target chip.
4. You may also highlight the + (or -) then press the ENT key
to sequentially bring up the data of available targets.
5. Press the EDIT key to exit.