Specifications

Vessel not commanded, limited maneuverability, limited by draught, aground or

reserved for future use

Ship is anchored or moored

The MX51x display is not communicating with the MX535B transponder.

Note: The displayed icons located on the top-right corner of the screen is set to blink off and on

every 3 seconds to allow the operator to see what is behind it and is not considered an alarm

condition. An every second blinking is an alarm condition.

To change the AIS Voyage settings, do the following:

1. Press the CFG key.

2. Scroll down to AIS Voyage menu.

3. Press the EDIT key to bring up the cursor on the right box.

4. Scroll to the item you want to change.

5. Using the left (or right) arrow key to move the softkey highlight to the CHANGE softkey.

6. Press the ENT key to activate the CHANGE softkey to parse through the available settings or use

the alphanumeric keypad to enter name of place or numbers.

7. Press the EDIT key to accept entry and exit.

Note: Normal VHF transmission power is 12.5 Watts. Low Power is 1 Watt if Vessel type selected is

“Tanker”, Speed is below 3 knots and Navigation Status is “Moored”.