Specifications

38
6.1 Mechanical Mounting
6.1.1 Transponder unit
Use the standard Mounting Kit. For dimensions and positioning of holes see Figure 14-1 MX535B
Transponder Unit- mechanical dimensions.
When selecting a mounting location for the Transponder the following guidelines apply:
1. Keep the transponder out of direct sunlight.
2. Do not mount the transponder where it can be directly exposed to seawater as corrosion then
may appear and cause leakage.
3. The unit must not be mounted near exhaust pipes and vents.
4. Even though the transponder is a robust unit, it is advised that it should be mounted were shock
and vibration are minimal.
5. Unit shall not be located near electromagnetic field generating equipment.
6. Leave sufficient space at the sides and top of the unit for maintenance and repair.
Also leave slack in cables for the same reason.
7. Do not mount transponder unit too close to a magnetic compass:
Compass safe distance: Standard Compass: 95 c
m
Steering Compass:
65 cm
The MX535B transponder unit can be mounted
in all directions, either on a wall, roof or floor.
The unit is very robust and made of cast
aluminum coated with black paint for best type
of protection.
For detailed mechanical drawings, see chapter
12, ”Outline Drawings”.
6 Installation
Figure 6.1 Transponder Unit, exploded view. Opening of outer lid.