Specifications

54
6.3.9
Pilot/Aux. Display Connection
This Port may be mandatory to be used with Pilot port connector (See picture below) on some vessels.
Otherwise, this port may be used to connect the ECS/ECDIS).
This port is one of two options to connect a Pilot connector, as it is also possible to connect Pilot port
cable to the MX512 Display Unit, see installation manual for the MX512.
Figure 6.15 Pilot plug with cable 1
Default speed on this port is 38400 baud.
Figure 6.16 AMP 206486-1 (Pilot Plug) pin out