Specifications

60
8.1.2
AIS Static
AIS Static Setup
The AIS Static Setup contains both the ship’s static data and AIS transponder configuration. This
setup must be done after installation or at any time changes are made to the ship’s AIS
transponder unit.
It is important to note that critical AIS static setup items (such as MMSI, IMO, Ship name, Call Sign
and others) are password protected. Setup items that require administrator password are
indicated in the Display Field Descriptions below. If an invalid or missing password is used, a
password message will be displayed and the entry will be rejected. Press the ‘Cancel alarm’
softkey to continue.
Follow the procedure below to enter the required AIS static information:
1. Press CFG key.
2. Highlight the AIS Static under the ‘Item’ column.
3. Press the EDIT key to start editing the AIS Static setup.
4. The “AIS Connected (Port 5): - No” will be highlighted, press the ENT key to activate the
Change softkey to change the value to “Yes”.
5. Move the highlight to other required setup items and enter the numeric values or press the
ENT key to toggle the value. You will need to use the “admin” password to change critical
values in the AIS Static menu (see page 63).
6. Press EDIT key when done editing the AIS Static menu.
More AIS Static configuration parameters are available by scrolling down using the down arrow cursor
key as shown below.