Specifications

63
How to change transponder settings under the AIS Static configuration using the
administrator password:
1. Press the CFG key.
2. Scroll down to AIS Static menu.
3. Press the EDIT key to bring up the cursor.
4. Scroll down to MMSI, Ship or Call Sign field.
5. Highlight the SET AIS PASSWORD softkey using the left (or right) arrow key.
6. Press the ENT key to commence entry of the “admin” password using the procedure below:
To enter the password “admin” do the following:
a. Press the #1 key to bring up the lowercase letter “a”.
b. The cursor will advance to the next character.
c. Press #2 key 1 time to bring-up the letter “d”.
d. Press the #5 key one time for letter “m”.
e. Press the #3 key 3 times for letter “i”.
f. Press the #5 key 2 times for letter “n”.
g. Highlight the DONE softkey and then press the ENT key.
7. Move the cursor to the MMSI number and enter the desired value using the numeric keypad.
8. Move the highlight to “Ship:” and spell out the name of the vessel (up to 20 alphanumeric
characters).
9. Move the highlight to “Call Sign:” and enter up to 7 characters.
10. To change other setup items, scroll down or up to it and enter the number or name required.
11. At the end of editing, press the EDIT key to exit.