Specifications

71
Text
Identifier
“Indicators”
(Shown on Display unit and
also sent as text message to
ECS/ECDIS or other equipment
connected to PI port)
Description
021 External DGNSS in use DGNSS is norm al l y the same as D GPS , which indicates
external type of such sensor
is in use
022 External GNSS in use GNS S is norm all y the same as GP S, which indicates
external type of such sensor is in use
023 Internal DGNSS in use (beacon)
Internal D GN SS (DGPS ) (beacon) i n use ind icates a D
GNSS beacon receiver is connected and transmi t vali d
data to T R -8000
024 Internal DGNSS in use (Message
17)
Inter nal D GN SS (DGPS ) (Message 17) in use
indicates Differenti al correction data is sent from an A
IS
B ase Stati on to thi s T R -8000 transponder
025 Internal GNSS in use
The i
n buil t GNSS (GP S) receiver i s i n use
027 External SOG/ COG in use
SOG
(S peed Over Groun d)/ C OG (Course Over Ground) from
external. GNSS (GP S) devi ce is in use
028 Internal SOG/ COG in use SOG (Sp eed Over Ground)/ C OG (Course Over Ground) from
internal. GNSS (GP S) devi ce i s in use
031 Heading valid True Headi ng i s recei ved from either an extern al Gyro or
Satell ite compass
033 (ROT) Rate of Turn Indicator in
use
ROT received from external sensor: T I (T urn Indi cator)
034 Other ROT source in use No TI (Turn Indicator) from external sensor,
ROT (Rate of Turn) value is calculated from HDT internally
036
Channel management
parameters changed
If either “Region setting” is applied manually or from msg.
received
f AIS B St ti thi i di t ill b h
8.2.5
AIS Status indicators
AIS Status indicators (AIS9 screen)
The table below shows the status indicators and description shown in the AIS9 screen.