Specifications

72
8.2.6
Sensor Baud rate
MX535B Sensor Port Baud rate:
The baud rate of sensor ports 1, 2 and 3 can be controlled using the MX51x display. Use the procedure below
to change the baud rate:
1. Press the CFG key.
2. Scroll down to AIS Static menu.
3. Press the EDIT key.
4. Enter the password using the “Set AIS Password” softkey. This softkey will be highlighted.
5. Press the ENT key to commence entry of the “admin” password using the procedure below:
To enter the password “admin” do the following:
a. Press the #1 key to bring up the lowercase letter “a”.
b. The cursor will advance to the next character.
c. Press #2 key 1 time to bring-up the letter “d”.
d. Press the #5 key one time for letter “m”.
e. Press the #3 key 3 times for letter “i”.
f. Press the #5 key 2 times for letter “n”.
g. Highlight the Done softkey, then press the ENT key.
h. Press the #5 key 2 times for letter “n”.
i. Highlight the Done softkey, then press the ENT key.
6. Scroll down to “Sensor 1 Baud Rate: …. 4800” (or other sensor #) to 38,400.
7. Highlight the CHANGE softkey.
8. Press the ENT key to change the baud rate.
9. Press the EDIT key to exit.
10. You will need to recycle the power to the MX535B so this baud rate change will take effect.