Specifications

1
1.1 Safety Instructions
This equipment should be installed according to the instructions found in the installation part of this
manual.
The equipment should not be mounted in a way that exposes it to excessive heat from the sun or
other sources.
The equipment should not be mounted in a flammable environment.
The equipment should not be mounted in a way that exposes it to direct rain or water.
CAUTION!
This equipment contains CMOS integrated circuits. Observe handling precautions to avoid static
discharges which may damage these devices.
Do not open equipment. Only qualified personnel should service the equipment.
1.2 Compass Safe Distance
Transponder unit:
Standard Compass: 95 cm
Steering Compass: 65 cm
Display unit:
Standard Compass: 30 cm
Steering Compass: 14 cm
1.3 Copyright Notice
This manual, as well as the software described in it, is furnished under license and may be used or copied
only in accordance with the terms of such license. The content of this manual is furnished for informational
use only, is subject to change without notice, and should not be constructed as a commitment by Navico
Holding AS. Except as permitted by such license, no part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording, or
otherwise, without the prior written permission by Navico Holding AS.
Please remember that existing artwork or images that you want to include in your project may be
protected under copyright law. The unauthorized incorporation of such material into your new work could
be a violation of the rights of the copyright owner. Please be sure to obtain any permission required from
the copyright owner.
1.4 Disclaimer Notice
The information in this book has been carefully checked and is believed to be accurate. However, no
responsibility is assumed for inaccuracies. Simrad reserves the right to make changes without further notice
to any products or modules described herein to improve reliability, function or design.
Simrad does not assume any liability arising out of the application or use of the described product.
1 Introduction