4XLFN 8VHU 0DQXDO 3 1 < 5HY $ 9HUVLRQ
Please read this first! Warning: Although ACR strives for accuracy in all its publications; this material may contain errors or omissions, and is subject to change without prior notice. ACR shall not be made liable for any specific, indirect, incidental or consequential damages as a result of its use. ACR components may only be used in safety of life devices or systems, with the express written approval of ACR, as the failure of such components could cause the failure of the ACR device or system.
GlobalWatchTM UAIS Short Operation Manual Index Page Number 1 GLOBALWATCHTM UAIS Components and Interfaces........................................................................ 1 2 GLOBALWATCHTM UAIS User Interface ............................................................................................... 2 3 Navigation Screen...................................................................................................................................
History of Changes Date 2002-12-04 2003-06-30 2004-04-14 Version 1.0 1.0.1 1.0.1 GlobalWatchTM UAIS Quick User Manual Status Released Released Comments Latest release amendments Corrections Changes upon Customer Requests Responsible A. Lesch B. Werner S. Reinisch III Y1-03-0176A Version 1.
1 GLOBALWATCHTM UAIS Components and Interfaces GlobalWatchTM Quick User Manual 1 Y1-03-0176A Version 1.
2 GLOBALWATCHTM UAIS User Interface Soft Keys [M1] – [M8] Display Safety Keys Navigation Screen Header (max. 3 lines) ______________________________ Navigation Screen or MENU Structure (Content 13 lines) Keyboard Cursor Enter Key GlobalWatchTM Quick User Manual Cross 2 Y1-03-0176A Version 1.
3 Navigation Screen GPS Solution Latitude & Longitude Own speed over Ground Own course over Ground UTC Time LAT:N 1^27.845'ExtSOG:34.6kn 11/26/2002 LON:E 0^21.289'IntCOG:173.0^ 10:52:26 IntGPS: 3D ExtHDT:222^ Reg6 A/ 001/021..ShipName....RNG.BRG..SOG..COG.. 1>DOREEN-----------> N/A 120 22.2 301.5 2>FINE EAGLE------->0.00 N/A 13.1 359.9 3>SYLVAEPSILON----->0.10 23 32.1 203.2 4>ESSOTOKYO-------->0.43 99 10.0 120.3 5>OLYMPIAHIGHWAY FE>0.59 342 21.2 50.0 6>SANEI------------>0.80 272 32.1 270.
4 Inputing Voyage Related Data – (User Password Protected) Note: The User Password is set to “NAUT” – please reconfigure it immediately after Transponder initial operation Select “Voyage Settings” from the Main Menu with the cursor button [Up] & [Down] or press Nr. 3 on the keyboard N 1^20' E 0^13' |1> N/A|2>0.00|3>0.10nm |---------------------------------| Menu -----| | | +- 1. Messages View | +- 2. AIS Status | +- 3. Voyage Settings -----| +- 4. Ship Settings | +- 5. Transponder Configuration Msg.
Scroll the Voyage Data Fields with [Enter] and input own vessel data. Select a default Cargo Type and NavStat Setting with the cursor buttons [Left] & [Right]. Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing [Exit]. Press [Back] to return to the Main Menu without saving any changes. N 1^18' E 0^12' |1>0.01|2>1.30|3>1.80nm *********** Voyage Settings ************ Cargo : Draught :24.8m PoB :1 Dest. :CASABLANCA ETA :10/13 12:31 NavStat.
5 Setting Ship Related Data – (User Password Protected) Select “Ship Settings” with cursor button [Up] & [Down] or press Nr. 4 on the keyboard. Note: The User Password is set to “NAUT” – please reconfigure it immediately after Transponder initial operation N 1^23' E 0^16' |1>0.01|2>1.30|3>1.80nm |---------------------------------| Menu -----| | | +- 1. Messages View | +- 2. AIS Status | +- 3. Voyage Settings -----| +- 4. Ship Settings | +- 5. Transponder Configuration Msg. | +- 6.
Scroll the Ship Settings Fields with [Enter] and input own vessel data. Select a default Ship Type with the cursor button [Left] & [Right]. Save the new settings by pressing [Save]. By pressing [Back] you return to the Main Menu Screen without saving any changes. N 1^19' E 0^12' |1>0.01|2>1.30|3>1.
6 Configuring the GlobalWatchTM UAIS – (User Password Protected) Select “Transponder Configuration” with the cursor button [Up] & [Down] or press Nr. 5 on the keyboard. Note: The User Password is set to “NAUT” – please reconfigure it immediately after Transponder initial operation N 1^19' E 0^13' |1>0.01|2>1.30|3>1.80nm |---------------------------------| Menu -----| | | +- 1. Messages View | +- 2. AIS Status | +- 3. Voyage Settings -----| +- 4. Ship Settings | +- 5. Transponder Configuration Msg. | +- 6.
Select desired Submenu with the cursor buttons [Up] & [Down] or by pressing the appropriate number on the keyboard. N 1^20' E 0^13' |1>0.01|2>1.30|3>1.80nm |---------------------------------| 5. Transponder Configuration -----| | | +- 1. Change User Password View | +- 2. Region Settings | +- 3. Alarm Settings -----| +- 4. Interrogation Settings | +- 5. Sensor Settings Msg.
Alarm Settings: Select Submenu 3 Press [Change] to enable or disable the Alarms Function. [Back] takes you to the Submenu without saving, by pressing [Save] the changes are stored and by pressing [Exit] you return to the Submenu. Note: It is highly recommended to enable the Alarm Function. N 1^21' E 0^15' |1>0.01|2>1.30|3>1.80nm ************ Alarm Settings ************ on/off Alarm generation: [*]/[ ] Note: This setting also affects output on ECDIS port.
7 Changing the Service Password – (Service Password Protected) Note: The User Password is set to “NAUT” – please reconfigure it immediately after Transponder initial operation Select “Service Configuration” from the Main Menu with the cursor button [Up] & [Down] or press Nr. 6 on the keyboard. N 1^19' E 0^13' |1>0.01|2>1.30|3>1.80nm |---------------------------------| Menu -----| | | +- 1. Messages View | +- 2. AIS Status | +- 3. Voyage Settings -----| +- 4. Ship Settings | +- 5.
Select Submenu 1: Change Service Password. N 1^23' E 0^17' |1>0.01|2>1.30|3>1.80nm |---------------------------------| 6. Service Configuration -----| | | +- 1. Change Service Password View | +- 2. User Password Settings | +- 3. Change MMSI / IMO -----| +- 4. Restore Factory Settings | Msg. | | -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back Input new Service Password (4 – 8 characters) and press [Enter] to save. Press [Back] to return to the Submenu without saving.
8 Changing the MMSI / IMO Numbers Select “Service Configuration” from the Main Menu with the cursor button [Up] & [Down] or press Nr. 6 on the keyboard. N 1^19' E 0^13' |1>0.01|2>1.30|3>1.80nm |---------------------------------| Menu -----| | | +- 1. Messages View | +- 2. AIS Status | +- 3. Voyage Settings -----| +- 4. Ship Settings | +- 5. Transponder Configuration Msg. | +- 6. Service Configuration | +- 7.
Input new MMSI / IMO Numbers and press [Save] to store input data. Press [Back] to return to the Submenu without saving. Note: Data input is limited to 9 characters. N 1^21' E 0^14' |1> N/A|2>0.00|3>0.10nm ********** Change MMSI / IMO *********** MMSI :1193046 IMO No.:303174162 ---------------------------------------NUM| Save | | | Back GlobalWatchTM Quick User Manual Y1-03-0176A 14 Version 1.
9 Writing an Addressed Safety Related Message to an individual Vessel Select the Main Menu Screen with the [Menu] Button. N 1^46' E 0^39' |1>0.10|2>1.30|3>1.80nm |---------------------------------| Menu -----| | | +- 1. Messages View | +- 2. AIS Status | +- 3. Voyage Settings -----| +- 4. Ship Settings | +- 5. Transponder Configuration Msg. | +- 6. Service Configuration | +- 7.
N 1^26' E 0^20' |1>0.10|2>1.30|3>1.80nm ************ Write Message ************* ..ShipName......Dist..SOG..COG..CallSign 1>DOREEN-------> N/A 22.2 301.5 DORET6W 2>FINE EAGLE--->0.00 13.1 359.9 OEX1538 3>SYLVAEPSILON->0.10 32.1 203.2 ND4RX 4>ESSOTOKYO---->0.43 10.0 120.3 ZA9A 5>OLYMPIAHIGHWA>0.59 21.2 50.0 3FSH4 6>SANEI-------->0.80 32.1 270.1 YJQX9 7>KATOO-------->1.00 21.2 200.8 A4F317 8>OLYMPIA PALAC>1.34 [BASESTAT] 4DSW 9>MINILOG------>1.96 21.7 102.2 FOR6 10>ALIBRAHIMYA->2.66 22.1 30.
10 Writing a Broadcast Safety Related Message to all Vessels Select Messages with the cursor button [Up] & [Down] or press Nr. 2 on the keyboard. Select “Write Broadcast SRM”. N 1^19' E 0^12' |1>0.10|2>1.30|3>1.80nm |---------------------------------| 1. Messages -----| | | +- 1. Write Addressed SRM View | +- 2. Write Broadcast SRM | +- 3. Inbox History -----| +- 4. Inbox SRM | +- 5. Inbox ALR (valid only) Msg. | +- 6.
After message transmission, the Transmission Status Screen is displayed. N 1^19' E 0^13' |1>0.10|2>1.30|3>1.80nm ---------------------------------------++++++++++++++++++++++++++++++++++++++++ Broadcast Transmission Status [+] OK, broadcast successful ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| | Send To | | <-Back After Messaging is completed, the GlobalWatchTM UAIS automatically returns to the Navigation Screen.
11 Safety Functions – MOB and SRM Buttons The GlobalWatchTM UAIS Transponder is fitted with Safety Keys, which allows automatic transmission of urgent messages. The SRM Button sends out Broadcast Safety Related Messages to all ships in the Vessel Listing. The MOB Button sends out precise position of incident to Addressed Vessels. MOB Person over Board By pressing the MOB button the current navigation position of own vessel and time of incident is automatically saved.
SRM - Safety Related Message The desired Distress Message Text can be selected by pressing the appropriate number on the keyboard. By pressing the [Exit] button it is possible to escape from this screen, without sending the SRM Message. Note: If no Message Subject is selected, the message is automatically sent as an undesignated distress call. N 1^22' E 0^15' |1>0.01|2>1.30|3>1.80nm ************ Write Message ************* -SRM----SRM----SRM----SRM----SRM----SRMBroadcast message 1. UNDESIGNATED 2.
Note: The SRM message transmission is automatically repeated every 180 seconds until the [Stop] button has been pressed. LAT:N 1^19.008'ExtSOG:34.6kn 11/28/2002 LON:E 0^12.452'IntCOG:173.0^ 07:31:52 IntGPS: 3D ExtHDT:222^ Reg6 SRM /B -SRM----SRM----SRM----SRM----SRM----SRMMAYDAY,DE,ANDREA DORIA,D11233,1193046,PO S:N 1^19.006'_E 0^12.451'_UTC07:31 - F IRE, EXPLOSION Repeating SRM in 180 sec...
12 Display Settings Select “Display Settings” from the Main Menu with the cursor button [Up] & [Down] or press Nr. 7 on the keyboard. N 1^19' E 0^13' |1>0.01|2>1.30|3>1.80nm |---------------------------------| Menu -----| | | +- 1. Messages View | +- 2. AIS Status | +- 3. Voyage Settings -----| +- 4. Ship Settings | +- 5. Transponder Configuration Msg. | +- 6. Service Configuration | +- 7.
13 Contact and Support Information ACR Electronics Customer Service 5757 Ravenswood Road Fort Lauderdale, FL 33312 U.S.A. Tel.: +1 (954) 981-3333 Fax: +1 (954) 983-5087 info@acrelectronics.com www.acrelectronics.com GlobalWatchTM Quick User Manual Y1-03-0176A 23 Version 1.
