User Guide

Page 2 of 2
N:\Technik\TechnicalSupport\Prozess_Doku\InstallationChecklist_V02us.doc
Sensor CH1 (optional)
Sensor CH2 (optional)
Sensor CH3 (optional)
Channel 4
Channel 5 (optional)
Channel 8 (optional)
Channel 9 (optional)
Converter Type
Transponder Configuration:
IMO No (if available)
MMSI
ShipName CS
ShipType Length
Beam Draught
Cargo Destination
RefPtExt: A B C D RefPtInt: A B C D
BaudRate Sensor1:
BaudRate Sensor2:
BaudRate Sensor3:
Functionality Check:
Now check your Transponder functionality - the correct values for LAT, LON, SOG, COG, and
Time should appear.
Reading out the Alarm Status, the Installation Manual includes a Tabel for reaction of system and
remedy.
Please list the invoked Alarms:
Alarm type: Yes No Alarm type Yes No
ID 01 Tx-Malfunction ID 02 VSWR limit
ID 03 Rx ch1 Malfunction ID 04 Rx ch2 Malfunction
ID 05 Rx ch70 Malfunction ID 06 General failure
ID 25 External EPFS lost *) ID 26 No Sensor
ID 29 No valid SOG info ID 30 No valid COG info
ID 32 Heading lost/invalid *) ID 35 No valid ROT info *)
*) will appear at workboat installation
Please return this form by Email after Transponder installation to Nauticast Technical
Support Department to [e-mail]
If Email is not available, please fax this form to: 866-XPACKUS (866-972 2587)
Erstellt: C. Moore
Geprüft: B. Werner
Freigegeben: A. Lesch
Gültig ab: 20.09.2004
Y1-03-0183-1 Rev. A