Specifications

Y1-03-0141F 9

Figure 6- URP-102 Point Pad™

Surface Mount Case with gasket and Flush Mount Case with gasket

SECTION 6- URC-102 Master Controller

Mounting

The Master Controller can be mounted in any position near the searchlight that is

protected from the weather. Check in advance that the coax cable from the Point Pad™

and the wiring harness from the searchlight can be routed to this location. Mount the

Master Controller with the wires and coax facing down. Use an appropriate fastener for

your mounting location. Use a sealant in fastener holes to prevent moisture intrusion.

General wiring scheme

The RCL-50B has a unique wiring scheme. Special attention must be paid to the

following chart. The Master Controller is supplied with an in-line fuse-holder on the

orange power lead. Use only 15 amp fuses in this fuse-holder. See Figure 9 for the

master controller wiring diagram.

WARNING: Failure to follow this arrangement may damage components.

Master

Controller Wire

Searchlight

Cable Wire

Power Source Lead

Function

Orange

+12 VDC or +24

VDC**

Power

Blue

Ground

Yellow

Lamp Power

Green

Lamp Ground

Red

White

Down

Black

Right

Brown

Left

Table 1