Specifications

Installation
Page 7
• It is recommended that the AIS receiver is installed in a 'below
decks' environment.
• It is acceptable to mount the AIS receiver either vertically or
horizontally.
• The product is supplied with two self tapping screws for
attachment of the AIS receiver to a suitable surface. Please refer
to
Figure 6 for guidance.
• The AIS receiver should be mounted in a location where the
indicator is readily visible as this provides important information
on the status of the AIS receiver.
Figure 5 AIS receiver dimensions
80 mm
70 mm
65.5 mm
33.25 mm
50 mm