Specifications

Troubleshooting
Page 12
5 Troubleshooting
If the guidance given in the table above does not rectify the problem
you are experiencing, please contact your dealer for further
assistance.
Issue Possible cause and remedy
No data is being received
by the chart plotter
• Check that the power supply is connected
correctly.
• Check that the connections to the chart plotter are
correct.
• Check that the VHF antenna is correctly
connected in accordance with the instructions in
the manual
The indicator is not
illuminated
• Check that the power supply is connected
correctly.
The indicator is flashing
but AIS targets are not
displayed on the chart
plotter
• Check the chart plotter NMEA port configuration is
set to receive AIS data
• Check the chart plotter display settings are
configured to show AIS targets
• Consult the chart plotter manufacturers
documentation
The indicator is
illuminated but not
flashing to indicate
receipt of AIS data
• Check there are vessels equipped with AIS
transceivers in your area
• Check the VHF antenna is correctly installed and
connected