MODEL N0: 1-DIN DVD-NAVICEIVER WITH MOTORIZED 17.
CONTENTS BEFORE USING START CODE ............................................................................................................................................................. 06 FRONT PANEL ........................................................................................................................................................... 06 AUXILIARY LCD .....................................................................................................................................
ZE-NC514 USB MODE SELECT USB AS PLAYING SOURCE .......................................................................................................................24 TOUCH SCREEN CONTROLS ...................................................................................................................................24 ONSCREEN CONTROL BUTTONS ..........................................................................................................................24 SUSPEND PLAYBACK ....................
WARNINGS 1. Only connect this unit to a 12V DC power supply with negative grounding. 2. Never install this unit where the operation for safe driving is restrained. 3. Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce the risk of traffic accident, except when using the rear view video camera. 4. Never expose this unit, amplifier, speakers to moisture or water to prevent electronic sparks or fires. 5.
ZE-NC514 PRECAUTIONS 1. Never disassemble or a djust the unit without any professional guide. For details, please consult an authorized ZENEC dealer for inquiry. 2. lf the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or discoloration. 3. lf any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual.
BEFORE USING START CODE: 012345 (Description: Page 35) FRONT PANEL AV-IN 14 1. [WIDE] Key: Change display mode 2. [ ] Key: Next/Move cursor to the right 3. [ ] Key: Previous/Move cursor to the left 4. [NAV] Key: Enter/exit NAV source 5. [VOL] Knob: Adjust volume/active/deactive mute function 6. [Reset] Button: Reset the unit 7. [ /SRC] Key: Unit power/Change operating mode/Open source menu 8. AV-IN jack 9.
ZE-NC514 BEFORE USING 10. [ ] Key: Eject disc 11. [OPEN/CLOSE] Key: Open/Close the TFT monitor 12. [AS/TILT+] Key: Auto save/Preview scan/Increase display angle 13. [BAND/TILT-] Key: Change radio band/Decrease display angle 14. AUXILIARY LCD 1. Disc indicator ■ Light up when one disc is inside; Light off when no disc is inside. 2. Repeat mode indicator ■ Light up when repeat mode is on; Light off when repeat mode is off. 3.
Before using BEFORE USING REMOTE Remote CONTROL Control lntroduce of key Introduce offunctions key functions 1 2 17 18 3 4 5 6 7 8 19 20 21 22 MUSIC PHOTOS VIDEO iPod 23 TILT 9 10 11 12 13 24 25 26 27 28 29 PRESET 14 15 30 SETUP 16 CLEAR 31 32 Note: NOTE: Your remote control may differ slightly from the one pictured here.may The above ■ Your remote control differ only. diagram is for illustrative purpose slightly from the one pictured here.
ZE-NC514 BEFORE USING NOTES FOR REMOTE CONTROL USE 1. Aim the remote control at the remote sensor on the unit. 2. Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer. 3. DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not function properly. 4. The battery can work for 6 months under normal conditions. lf the remote control does not work, please change the battery. 5.
BASIC OPERATIONS POWER ON/OFF ■ Press any key on the front panel or the [POWER] key on the remote control to turn on the power under standby mode. The unit goes back to the last status after power on. ■ Press and hold the [SRC] key on the front panel or press the [POWER] key on the the remote control to turn off the power under work mode. NAV ■ Press the [NAV] key on the front panel to enter or exit navigation source.
ZE-NC514 BASIC OPERATIONS DISPLAY SYSTEM TIME ■ Press and hold the [DISP] key on the front panel to switch the display information between system time and playing source when the TFT monitor is closed. USING THE TFT MONITOR Open/Close monitor ■ Press the [OPEN/CLOSE] key on the front panel or remote control to push the display panel out or in. Change the monitor tilt angle ■ Due to the inherent character of LCD panels, you will get different vision impressions when you watch it from different angles.
RADIO MODE SELECT RADIO AS PLAYING SOURCE ■ Open the SOURCE MENU and then touch the RADlO icon. SELECT ONE RADIO BAND ■ Press the [BAND] key on the display panel or on the remote control or touch the [BAND] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and AM2. AUTO TUNING ■ Press the []/[] key on the display panel or on the remote control or touch the []/[] icon on the user interface to seek a higher/lower station.
ZE-NC514 RADIO MODE MANUAL SAVE When one expected radio station has been detected ... 1. Press the [MEM] icon on the user interface and the preset menu will be opened. 2. Press one preset button among P1~P6. 3. lf you want to abort, press the [Exit] button. PREVIEW SCAN ■ Preview scan searching is such a process that the searching pauses when a station is received and then played for 5–10 seconds. After being played, the unit continues the process until the whole band is detected.
RDS OPERATIONS The unit provides basic functions of RDS, including Pl (Program ldentification), radio station name, RT (Radio Text), CT (Clock Time), AF (Alternative Frequency), TA (Traffic Announcement) and PTY (Program Type) selection. AF FUNCTION ■ Alternative frequencies lists are used for the same program service and used in conjunction with the Pl code (Program ldentification code) to assist automatic tuning.
ZE-NC514 RDS OPERATIONS PTY FUNCTION ■ PTY is the abbreviation for Program Type which is a code defining the type of program being broadcasted (e.g. News or Rock). ■ Six PTY options will display on the screen. To view more PTY options, touch the scroll bar and arrows on the screen. ■ When one PTY option is touched (e.g. News), auto search for next available PTY by increasing tuning frequency will take place, until the PTY of the next station matches the current.
Insert a disc Upon inserting a disc, the unit will switch to disc mode automatically. Notes: DISC MODE ① Please confirm whether there is a disc in the unit before you insert another one. INSERT A DISC Some recorded discs, such as CD-R, CD-RW, DVD-R, DVD+R, ■ ②Upon inserting a disc, the unit will switch to disc mode automatically. DVD-RW, DVD+RW cannot be played back because of different NOTES: recording status.
ZE-NC514 DISC MODE ONSCREEN CONTROL BUTTONS Disc type/ Icon MP3/WMA CD VCD DVD MPEG Picture Numeric keypad Numeric keypad Numeric keypad Numeric keypad Numeric keypad Numeric keypad Setup menu Setup menu Setup menu Setup menu Setup menu Setup menu / Fast forward Fast forward Fast forward Fast forward / / Fast rewind Fast rewind Fast rewind Fast rewind / Previous Previous Previous Previous Previous Previous Next Next Next Next Next Next E Play/ Pause Pl
DISC MODE SUSPEND PLAYBACK ■ Press the [/] key on the front panel or remote control or open the onscreen control buttons menu and then touch the [/] button. To resume normal playback, repeat the above operation. STOP PLAYBACK ■ To stop playback, press the [] key on the remote control or open the onscreen control buttons menu and then touch the [] button.
ZE-NC514 DISC MODE REPEAT PLAYBACK ■ Press the [RPT] key on the remote control repeatedly or open the onscreen control buttons menu and then touch the [ ] button repeatedly to alter repeat mode according to the following table.
DISC MODE INTRO PLAYBACK ■ When this function is on, the unit will play back the first 10 seconds of each track of a VCD or CD disc. You can search the file you desired using this function. ■ Press the [SCN] key on the remote control to activate this function. Do the above operation again to cancel this function. DIRECT SEARCH ■ When a DVD, VCD or CD disc is played back, you can search for a particular chapter/ track by pressing the numeric keys of the remote control.
ZE-NC514 DISC MODE DVD MENU AND TLTLE ■ This function is only available for the DVD discs having "MENU/TlTLE". Press the [MENU] key on the remote control or open the onscreen control buttons menu and then touch the [MENU] button to open DVD MENU. You can select audio language, subtitle language and so on for playback. Press the [TITEL] key on the remote control or open the onscreen control buttons menu and then touch the [TITEL] button to open DVD TlTLE. You can select a different title for playback.
DISC MODE NOTES: ■ When PBC is on, playback goes back to the track list and starts from the first track. ■ When PBC is on, fast motion playback, slow motion playback or skip search is available but repeat playback and searching for a particular chapter or track is prohibited. ■ If you do the operation of random playback, scan playback or searching playback when PBC is on, PBC will be turned off automatically.
ZE-NC514 DISC MODE For VCD 1. Disc type. 2. PBC function indicator. "PBC On" indicates that PBC function has been activated. 3. VCD Track information. "6/18" indicates that this VCD has 18 tracks and the track playing back now is the sixth title. 4. Elapsed time of the current track.
USB MODE SELECT USB AS PLAYING SOURCE ■ Open the SOURCE MENU and then touch the USB icon. NOTES: ■ The unit switches to USB mode once an USB device has been inserted. ■ The unit supports hot swap. ■ USB storage devices formatted with FAT 16/32 are supported by this player, but not NTFS format. TOUCH SCREEN CONTROLS ■ The operation is the same as disc mode. ONSCREEN CONTROL BUTTONS ■ Onscreen control buttons under SD/USB mode are the same as disc mode.
ZE-NC514 USB MODE CHANGE FOLDER ■ The operation is the same as disc mode. REPEAT PLAYBACK ■ The operation is the same as disc mode. RANDOM PLAYBACK ■ The operation is the same as disc mode. INTRO PLAYBACK ■ The operation is the same as disc mode. DIRECT SEARCH ■ The operation is the same as disc mode. GOTO SEARCH ■ The operation is the same as disc mode. ZOOM IN/OUT ■ The operation is the same as disc mode. ROTATE PICTURE ■ The operation is the same as disc mode.
IPOD MODE SELECT IPOD AS PLAYING SOURCE ■ The unit will switch to iPod mode automatically when an iPod player is plugged into the unit. ■ To return to the iPod mode from any other sources, open the SOURCE MENU and then touch iPod. MUSIC PLAYBACK 1. Enter iPod music mode ■ Press the [TlTLE] key on the remote control or touch the music icon on the user interface. 2. Select one music file ■ Press the [Left]/[Right] key on the remote control. 3.
ZE-NC514 IPOD MODE VIDEO PLAYBACK 1. Enter iPod video mode ■ Press the [AUDIO] key on the remote control or touch the video icon on the user interface. 2. Control video files playback ■ Use the keys on your iPod player to control playback. NOTES: ■ To exit VIDEO mode, press the [MENU] button on the iPod. ■ To transmit the images (including videos and pictures) from your iPod to the TFT screen, you must set the following options through the iPod video settings menu: TV Out = On, TV Signal = NTSC.
DVB-T MODE SELECT DVB-T AS PLAYING SOURCE ■ Open the SOURGE MENU and then select DVB-T, and touch the screen to POP UP control menu. ■ Press the [] button to increase volume or press the [] button to decrease volume.
ZE-NC514 OTHER MODES AV-IN ■ External peripheral devices with RCA audio and video outputs can be connected with the unit. ■ To enter AV-lN mode, open the SOURCE MENU and then touch AV-lN. CAMERA ■ This player is "camera ready". Before accessing any camera features, you must purchase and install a rear video camera. Once the rear camera is connected and operating properly, the CAMERA source mode will become active.
SETUP SETUP PROCEDURES 1. Enter setup mode ■ Press the [SETUP] key on the remote control or touch the setup icon [ ] on the user interface. ■ The following menu appears after entering the setup mode. ■ The GENERAL sub-menu is highlighted by default. 2. Select one sub-menu ■ Press the direction keys on the remote control. 3. Select one item ■ Press the []/[] key on the remote control to select one item and then press the [ ] key to confirm. 4.
ZE-NC514 SETUP GENERAL ■ Clock mode 12 Hr: the clock displays in the type of 12 hours such as 11:18 AM. 24 Hr: the clock displays in the type of 24 hours such as 20:18. ■ Clock Adjust the clock displayed on the top right corner of the TFT screen. ■ Tuner Region The unit supports several radio systems and you can select a correct radio system according to your country. ■ Beep On: Background sound of key-press is on. Off: Background sound of key-press is off.
SETUP AUDIO ■ DRC Set the dynamic range of Dolby digital DVD discs. On: Playback more dynamic audio with Bass. Off: Normal output. ■ Loudness On: Loud mode is on. Off: Loud mode is off. ■ Subwoofer On: Open the subwoofer speaker. Off: Close the subwoofer speaker. ■ Sub Filter You can get different bass effect when you set different cut off frequency of subfilter. According to the acoustics surroundings of your car, select a proper frequency. 80Hz, 120Hz, 160Hz are available.
ZE-NC514 SETUP You should set a new password ASAP. METHOD OF CHANGING PASSWORD: 1. Locate the cursor on the 'password' option, press the numeric keys on the remote control or touch the 'Password' option directly to open the onscreen keypad, touch the numeric buttons to enter your password (original password for the first time) and then confirm. 2. Repeat the operation above to enter a new 6-digit password and then confirm. The new password becomes effective and the parental lock is closed.
SETUP 3. Close the parental lock ■ Repeat the operation of the first step to enter a 6-digit password (old or new) and then confirm. ■ The parental lock is closed. ■ Load Factory To restore the default settings relating with DVD playback (e.g.: DVD Audio, DVD Subtitle), press the [RESET] option. HARDWARE ■ Camera ln Normal: Actual scenes shot by the camera display on the TFT monitor while reverse driving (just like what you are watching).
ZE-NC514 SETUP ■ Source Select one playing source that you want to set relative volume. ■ Level You can set relative volume level from 0 to 6. METHOD OF CHANGING PASSWORT 1. Locate the cursor on the “Anti-PSW” option, press the numeric keys on the remote control or touch the “Anti-PSW” option directly to open the onscreen keypad. Touch the numeric buttons to enter the factory default code “012345” to deactivate the anti theft function. 2.
EQ ■ Audio control allows you to easily adjust the audio system to get the best possible sound effect. 1. Enter the EQ setup mode ■ Press the [SEL] key on the remote control or touch the EQ icon in the user interface and the following interface will display on the screen. EQ selection Fader/Balance adjustment area EQ parameters 2. Select EQ mode ■ Touch the EQ selection bar repeatedly and the EQ mode will change. 3.
ZE-NC514 TROUBLESHOOTING ■ What appears to be trouble is not always serious. Please check the following points before calling a service center. Problem Cause Corrective action General Unit can not power on. Unit fuse blown. lnstall new fuse with correct rating. Car battery fuse blown. lnstall new fuse with correct rating. lllegal operation. Reset the unit. Battery depleted. Change the Battery. Battery installed incorrectly. lnstall the battery correctly. lmproper audio output connection.
TROUBLESHOOTING (Continued) Problem Cause Corrective action Disc playback Cannot insert disc. A disc inside the unit already. Eject current disc and insert new one. Disc is warped or scratched. Use disc in good condition. Disc is dirty or wet. Clean disc with soft cloth. lncompatible disc is used. Use compatible disc. Disc is inserted upside down. lnsert disc with label side up. Disc region code is not compatible with unit. Use disc with proper region code.
ZE-NC514 DEVICE CONNECTIONS NOTES OF CONNECTION ■ This unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a mobile home, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, install a transformer to convert the output voltage to 12 V. ■ To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
DEVICE CONNECTIONS CONTROL CABLES Auto Brightness Control ■ To avoid the display being too bright at night time, if the headlight cable is connected to lLLUMl, turning on the head light will dim the backlight of the TFT LCD and vice versa. TELEPHONE MUTE ■ lf the MUTE cable is connected to a car phone, other audio outputs mute when one call is received by the car phone.
ZE-NC514 DEVICE CONNECTIONS PARKING BRAKE CABLE CONNECTIONS REVERSE DRIVING CABLE CONNECTIONS Gearbox 41
INSTALLATION AND UNINSTALLATION NOTES OF INSTALLATION 1. Before installation, please make sure proper connections are conducted and the unit operates normally. lmproper connection may result in damage to the unit. 2. Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit. 3. Before installation, please fasten all power cables. 4.
ZE-NC514 INSTALLATION AND UNINSTALLATION Dashboard Rubber Sheath Mounting Bracket Long Assemble Bar (Picture 2) 4. lnsert the unit into the bracket, fasten the M4 x 6 screw to the fireproofing board available at the back of the dashboard, and use 4 pieces of M2 x 2 screw to lock the assemble bars and the mounting bracket in position. NOTE: ■ According to the depth of the opening, use different length of assemblebar accordingly.
INSTALLATION AND UNINSTALLATION TRIM RING INSTALLATION ■ Attach the trim ring around the front panel with two indentions on one side facing upwards. UNINSTALL Disassemble trim ring 1. Push the trim ring upward and pull out the upper part. 2. Push the trim ring downward and pull out the lower part. DISASSEMBLE THE UNIT 1. Unscrew the 4 pieces M2 x 2 screws. 2. Use a screw driver to bend straight the bended mounting tab and tip out the unit from the mounting bracket.
ZE-NC514 SPECIFICATIONS General Reference Supply Voltage ....................................................................................... 12V (DC) Operating Voltage Range ............................................................................ 10.5~15.8V (DC) Max Operation Current .................................................................................................... 10A Grounding System........................................................................
SPECIFICATIONS Video Normal Video Input Level (CVBS)............................................................................ 1.0±0.2V Video Input Impedance ...................................................................................................75Ω Video Output Impedance ................................................................................................75Ω Video Output Level .................................................................................................. 1.0±0.
ZE-NC514 APPENDIX REGION CODE According to DVD sale region, the whole world is divided into six regions. A DVD disc can be played back only when its region code is compatible with that of the player in use.
APPENDIX WIRING CONNECTIONS 48
ZE-NC514 2 YEARS LIMITED WARRANTY Dear customer Thank you for purchasing this ZENEC product. It is advisable to keep the original packing material for any future transporting of the product. Should your ZENEC product require warranty service, please return it to the retailer from whom it was purchased or the distributor in your country. This ZENEC product is warranted against defective materials or workmanship for a period of TWO years from date of purchase at retail.
ZENEC by ACR AG · Bohrturmweg 1 · Bad Zurzach · Switzerland