Specification Sheet

ACR HemiLight™3
Automatic Survivor Locator Light
www.ACRARTEX.com
© 2015 ACR Electronics, Inc. 05/15
For further information please contact:
ACR Electronics, Inc.
5757 Ravenswood Road
Fort Lauderdale, FL 33312
Tel: (954) 981.3333
Fax: (954) 983.5087
Email: sales@acrartex.com
More About the HemiLight™3:
Smaller than other approved lights, the HemiLight™3
features rounded edges to maintain the integrity of
inflatable life jackets. Attachment loops accommodate webbing
of up to 5 cm (2 in) width. The marine tough design
ensures years of useful service.
The HemiLight™3 offers a basic strobe mode which can be
activated either manually or automatically.The high-intensity
flashing LED light automatically activates for 20+ hours when
it comes in contact with salt or fresh water, and can be
deactivated simply by pushing the red button. Once the sensor
is wet, and the light is on, the light will stay on even if the
sensor is dry, unless manually deactivated.
Installation is quick and easy (the HemiLight™ 3 can be
retrofitted to almost any style life jacket in a matter of seconds).
Manual Deactivation
SPECIFICATIONS
LED Strobe Light
Fresh or Salt Water
Activated
Product Number
3764
Size 2.44 x 1.19 x 1.13”
(6.19 x 3.02 x 2.87 cm)
Weight 0.98 oz (28 g)
Battery Non-hazardous lithium. 5 year life
(not replaceable)
Meets DOT and IATA rules for safe
transport
Material Polycarbonate
Activation Automatic when in contact with water
(fresh or salt), deactivate via manual
off button
Waterproof IP68, water tight to 10ft (3m)
Meets IMO standard
Beam Angle All directions of the upper hemisphere
Operational Life 20+ hours
Operating Temp +30°F to +86°F ( -1°C to 30°C)
Stowage Temp -22°F to + 149°F (-30°C to +65°C)
Approvals USCG, MED, and SOLAS
Limited Warranty 1 year
20+ Hours
USCG
(SOLAS Approved)
MED
This document is the property of ACR Electronics, Inc. (ACR) and is distributed by ACR
for the benefit of our customers. This document may not be disseminated, reproduced or altered
in any way without the prior written approval of ACR Electronics, Inc.
Model Number HL3