User Manual

Y1-03-0343 Rev. B Company Confidential
30
Note: Step 4 above requires use of the lanyard (included with your beacon) to attach
the clip to the beacon as shown. One side of the lanyard should be threaded through
the small hole on the side of the clip and then tied to the clip using a secure knot. The
other side of the lanyard should be tied to the beacon using a secure knot (see step 4
on prior page for location where lanyard should be tied to the beacon). This offers a
failsafe to ensure the beacon is not separated from the clip. The lanyard should be
utilized in this same manner when using the Belt Clip.
Belt Clip
In addition to enabling the user to attach the PLB to a belt, the Belt Clip can also be
used in conjunction with the provided velcro strap for a variety of different usage
applications (eg. attachment to backpack straps etc.). In order to utilize the velcro
strap, thread it through the holes in the Belt Clip (as shown below) and then attach the
Belt Clip to the PLB as shown in the images at the beginning of this section. After
attaching the Belt Clip to the PLB, the lanyard should be attached to the Belt Clip in the
same fashion as shown in the image for Step 4 of attaching the Oral Inflation Clip to
the Oral Inflation Tube.