Instructions / Assembly

VERTICAL GUARDRAIL #12045
FOR PARAPET WALLS & OPEN EDGES
• Capable of multiple applications including flat roofs, metal roofs, para-
pets, skylights, stairwells, elevator shafts, etc.
• Mounts to Any Vertical Surface: Parapet Walls, Header Beams, Floor
Joists, Wall Studs, Roof Trusses.
• Bracket can be screwed or bolted to lumber or masonry
• Attachment Plate Dimensions: 9.5” x 5.25”
• Easily Make Temporary Guardrail Around Holes / Edges
• Post holder is recessed 2”; for clearance of parapet cap & drip edges
• System comes with bracket & post
• Maximum spacing 8’ apart (used with construction grade lumber)
• Complies with OSHA regulations
• #12055 Posts are Interchangeable with all Acro Guardrail Systems
• Powder coated safety yellow
12045 Vertical Guardrail
Model # Description
Lbs. Dimensions
12045 Guardrail Bracket & Post 11 53”x12”x2”
12045 VERTICAL GUARDRAIL SYSTEM
In 2012 Acro introduced the Vertical Guard Rail system model 12045 which is designed for fall protection on low
pitch roofs, including parapet walls. This unique system is designed to be anchored on the outside of a parapet
wall so that work can be done to the decking and cap without interference from the fall protection system. The
12045’s durability and versatility also makes it ideal for temporary guardrailing around most openings or edges
(skylights, stairwells, elevator shafts, etc). 2 x 4 construction grade lumber is used for cross rails. The design was
updated in 2013 to allow for clearance of 2” parapet caps and drip edges and also to allow for post height adjust-
ment.
Please visit our website for full install instructions
PHONE (TOLL FREE): 800-267-3807
FAX: [phone]
WEB: WWW.ACROBUILDINGSYSTEMS.COM
EMAIL: [e-mail]