Instructions / Assembly

WALL SCAFFOLD #12048 & PLATE HANGER #12020
• Complies with OSHA regulations
• Optional Over the Plate Hanger
• Creates safety perimeters on new construction
• Installs on all 4 sides or use End Fence Guardrail
• 42” Guardrail Posts
• Ideal for truss installation
• Maximum spacing 8’ apart
• Powder coated safety yellow
• Made in America
The easy-to-use 12048 scaffold brackets offer convenience for residential
or commercial roofing projects. They are installed over wall sheathing just
below the eave height on one or all four sides of a structure to create a safe,
convenient walkway for erection of roof trusses, plywood, shingle, fascia,
gutters, and under-eave covering. They include a 3/16" sway brace for right
or left hand use and a 5/8" safety bolt and clip. The #12020 Plate Hanger
may be used to hook the scaffold bracket over the plate in lieu of using the
safety bolt and clip. Install Scaffold Bracket not more than 8 feet apart on a
sound stud. Drive nail into stud at bottom of each bracket. Install Safety "J"
Bolt and Clip on each Scaffold Bracket. Drill a 5/8" hole on side of stud in
line with hole in vertical Bracket member. Insert Safety Bolt through 5/8"
hole from inside of building and place "J" Bolt hook around stud. Put Clip
on the other end, which laps over vertical member. Securely fasten nut to
pull vertical member tightly against outside wall. Please visit our website
for full install instructions
36” & 48” WALL SCAFFOLDING
Wall Scaffolding
Model # Description
Lbs. Open Dem
12048 48” Scaffold Bracket 20 48x48x4
12020 Over Plate Hanger 10 63x24x4
12056 Guardrail Post & Holder 10 42x9x4
12054 54” 2x8 Corner Bracket 26 54x54x14
12022 Replacement Post Holder 4 9x9x4
12055 Replacement Post 6 42x4x1
10140 End Fence Guardrail 10 42x28x5
Folded Dem
56x4x4
63x4x2
76x14x12
42x12x5
PHONE (TOLL FREE): 800-267-3807
FAX: [phone]
WEB: WWW.ACROBUILDINGSYSTEMS.COM
EMAIL: [e-mail]