Operation Manual

ManualsBrandsAcronis ManualsSoftwareAccess

111

112

113

114

115

116

117

118

119

120

2. Set the Action to Create.

3. For the path, enter the following token: %USERPROFILE%\Desktop\AAS Data Folder

Creating the registry:

1. Right-click on Registry and select New -> Registry Item.

2. Set the Action to Create.

3. For Hive, select HKEY_CURRENT_USER.

4. For the path, enter the following: Software\Group Logic, Inc.\activEcho Client\

5. Now do the following for the desired entries:

6. For the Username:

a. For Value name enter "Username".

b. For Value type select REG_SZ.

c. For Value data enter the following token: %USERNAME%@%USERDOMAIN%

7. For the Server URL:

a. For Value name enter "Server URL".

b. For Value type select REG_SZ.

c. For Value data enter the address of your Access Server. e.g. https://myaccess.com

8. For the Sync-Folder:

a. For Value name enter "activEcho Folder".

b. For Value type select REG_SZ.

c. For Value data enter the following token and path: %USERPROFILE%\Desktop\AAS Data

Folder

9. For the Auto-Update:

a. For Value name enter "AutoCheckForUpdates".

b. For Value type select DWORD.

c. For Value data enter "00000001". The value "1" enables this setting and the client will

automatically check for updates. Setting the value to "0" will disable the setting.

10. For the Certificates:

a. For Value name enter "AllowInvalidCertificates".

b. For Value type select DWORD.

c. For Value data enter "00000000". The value "0" disables this setting and the client will not be

able to connect to Acronis Access servers with invalid certificates. Setting the value to "1" will

enable the setting.

5.6 Monitoring Acronis Access with New Relic

This type of installation will let you monitor your Acronis Access Server application, not the actual

computer on which it is installed.

1. Open http://newrelic.com/ http://newrelic.com/ and create a New Relic account.

2. For Application type select Mobile app.

3. For Platform mark Ruby.

4. Finish creating your account and log in.

5. Go to Applications, leave the ruby bundle(step 1) as is and continue to the next step.