Operation Manual

1.2.1.3 Modifying Policies

Existing policies can be modified at any time. Changes to policies will be applied to the relevant

Access Mobile Client users the next time they launch the mobile app.

Client management connectivity requirements

Access Mobile Clients must have network access to the management server in order to receive profile updates,

remote password resets, and remote wipes. If your client is required to connect to a VPN before they can access

Acronis Access Gateway servers they will also need to VPN before management commands will be accepted.

To modify a group policy

1. Click the Groups Policies option in top menu bar.

2. Click on the group you would like to modify.

3. Make any changes necessary on the Edit Group Policy page and press Save.

4. To temporarily disable a policy, uncheck the check box in the Enabled column for the desired

group. This change takes effect immediately.

5. To change a group's priority, click the up or down arrow in the Manage Groups Profiles list. This

will move the profile up or down one level.

To modify a user policy:

1. Open the User Policies tab.

2. Click on the user you would like to modify.

3. Make any changes necessary on the Edit User Policy page and press Save.

4. To temporarily disable a policy, uncheck the check box in the Enabled column for the desired

user. This change takes effect immediately.

1.2.1.4 Creating a Blocked Path list

You can create blacklists for paths you do not want your users to be able to self-provision from

mobile devices. These lists must be assigned to a User or Group policy and are valid only for

self-provisioned paths. When the list has been created and assigned to the proper Users and/or

Groups, you need to enable the Block access to specific network paths for every User/Group policy

that you want it to affect.

To create a list:

1. Open the web interface as an administrator.

2. Open the Policies (p. 8) page.

3. Click on the desired User policy or Group policy.

4. Open the Server Policy (p. 21) tab.

5. Select the Block access to specific network paths check box.

Note: You must perform this step for each User/Group policy that you want to assign the blacklist to.

6. Press Add/Edit lists.