Operation Manual

4. Open the Acronis Access Web Interface.

5. Open the Mobile Access tab.

6. Open the Gateway Servers page.

7. Press the Add New Gateway Server button.

8. Enter a Display Name for your Gateway Server.

9. Enter the DNS name or IP address of your Gateway Server.

Note: If your mobile clients connect to the gateway by going through a reverse proxy server or

loadbalancer you should enable Use alternate address for client connections and enter the DNS name or IP

address of your reverse proxy server or loadbalancer.

10. Enter the Administration Key.

11. If required, allow connections with self-signed certificates to this gateway by enabling Allow

connections from Acronis Access servers using self-signed certificates.

12. Press the Save button.

After you've registered your Gateway Server, you may want to configure custom access restrictions

for this Gateway Server. For more information on this, visit the Editing Gateway Servers (p. 40)

section.

1.5.2 Server Details

Opening the Details page of a Gateway Server gives you a lot of useful information about that

specific server and its users.